This is version 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 . It is not the current version, and thus it cannot be edited.

Back to current versionRestore this version

GENERIC EMPLOYEE INTERFACE#

The UEEF provides the capability to generate an interface file from the employee basic information such as Personals, Employments, prime Assignments, Entities, Locations, Jobs, Positions, Departments, Units, Groups etc and additional information for Benefit plans with Contacts information.

Required Set Up#

Step 1 - Define Lexicons in IMLN#

The following list of lexicons are provided and are used by the UEEF Employee Generic Interface.

• X_INTERFACE_TYPE
  The following Interface type from X_INTERFACE_TYPE must be used for IDIF screen:
  35 – EEM/EAS Interface
• X_INTERFACE_LEVEL
  The following Interface types from X_INTERFACE_LEVEL are used on UEEF selection screen.:
  01 - EEM + EASD Generate interface file with Employment (EEM) and Prime Assignment (EASD) basic information
  02 - EEM + EASD + Contacts Same as 01, include EID Contact information
  10 - BE Plans Same as 01, include BE Plans information
  11 - BE + Contacts Same as 10, include BE Contacts information
  12 - BE + Pay Lines Not supported in UEEF, used by UPNVPERS
  13 - GAPERS/GATRS Not supported in UEEF, used by UBEF

• X_INF_VARIABLE_NAME
  X_INF_VARIABLE_NAME contains a list of system-defined variables that are eligible by Interface type. A list describing each variable and its usage for Interface type 35, can be found on the Interface Type 35 - EEM/EAS Interface page.

Step 2 - Define Interface Format in IDIF#

Fixed File Format The following set up instructions for a Fixed File format using the interface HL$BE-ELIGTOTAL

The interface does not need to be manually entered in IDIF it is loaded through seed data during an install or upgrade.

You should use (Copy Definition) to copy into a different Interface code and then enter your own company data.

XML File Format The following instructions are for building an XML format for the UEEF using the format HL$BE-ELIG-XML.

Step 3 - Defining UserCalcs#

The file format for the UEEF can be defined to call a UserCalc function at each Record Number, each Field Number.

The Variable Name must equal 'UserCalc' and the UserCalc name must be specified in the Constant Value field.

The Field Type must be defined with Char, Number or Date, the UserCalc function on IMUC screen Return Value must match the values (Char, Number or Date) with the IMUC RET command to return the corresponding Char, Number or Date.

The data base tables available for UserCalc are:

• at company level: DEN / DLN / DDP / DDD / DUN / DGR / DGD / DGV
• at employee level: EID / EPS / EEM / EAS / EASD / PPRU / PPRC / ECT
• for BE only: BPT / BPN / BCG / BCGD / BCGD / BCGR / BEND / BBR / ECT

Step 4 - Update Record Set Up#

During the UEEF run, you may update certain User Defined Fields (UDF) to indicate the Interface File has been generated and mark the records as being processed. You may reference these UDFs in IDIF to prevent the same information from being processed again.

On IDIF screen, Record Type '92-Update Record' should be defined at the end of the IDIF definition.

The Variable Name should contain the UDF (xxx) that is to be Updated or Inserted, e.g.'358043 - UDF (ECT) (35)'.

The Constant Value field should contain the Name of the UDF, e.g 'UEEF by BEN'. Please note that it will be up shifted.

If this UDF name does not exist on the IMUF screen, UEEF will create the UDF with this name on IMUF screen for the Data Base Table to be updated.

The Derivation Expression field should contain the expression that is evaluated to the value to be updated for the UDF.

The following Derivation Expression features can be used to derive the value to be updated:

• multiple fields processing, DECODE, BYPASS, String manipulation,concatenation, function calls etc

When UEEF is run in non-trial mode, Record Type '92-Update Record' will be processed at the appropriate levels to check if the UDF should be updated for the associated Data Base tables.

From above example:

• Rec#200 Field#10 indicates to update 'UDF (ECT)', this will be processed at the end of each qualified Contact
• Rec#200 Field#15 indicates to update 'UDF (BPN)', this will be processed at the end of each qualified Benefit Plan
• Rec#200 Field#20 indicates to update 'UDF (BEN)', this will be processed at the end of each qualified employee IBEN Benefit plan
• Rec#200 Field#30 indicates to update 'UDF (BEND)', this will be processed at the end of each qualified employee IBEN Benefit plan
• Rec#200 Field#40 indicates to update 'UDF (EPS)', this will be processed at the end of each qualified employee

Using the Returned Value of the Derivation Expression, UEEF finds if the UDF already exists.

If the UDF exists and the new value is different than the existed UDF value, it will be updated; if the UDF does not exist, it will be inserted.

List of UDF supported in UEEF from X_INF_VARIABLE_NAME are:

• 358030 - UDF (EID) (35)
• 358031 - UDF (EEM) (35)
• 358032 - UDF (EASD) (35)
• 358033 - UDF (EASD) (35)
• 358034 - UDF (EPS) (35)
• 358035 - UDF (DED) (35)
• 358036 - UDF (DDD) (35)
• 358037 - UDF (DLN) (35)
• 358038 - UDF (DUD) (35)
• 358039 - UDF (DGD) (35)
• 358043- UDF (ECT) (35)
• 358044- UDF (BEN) (35)
• 358045- UDF (BEND) (35)

After UDFs are updated or inserted in UEEF, the Number of Records Updated for each Data Base Table will be displayed on the UEEF report.

Note that these Number of UDF Updated represents the number of times the tables are being touched, these may not necessarily be the exact number of UDF for that Table, e.g. UDF (EEM) may be touched 2 times if an employee has 2 Contacts to update the same EEM but with a different Value

---

Processing Information#

Based on the selection criteria, UEEF retrieves employee basic information and primary assignment information

From the UEEF parameter 'Interface Level', the data base tables will be loaded accordingly:

• at company level: DEN / DLN / DDP / DDD / DUN / DGR / DGD / DGV
• at employee level: EID / EPS / EEM / EAS / EASD / PPRU / PPRC / ECT
• for BE only: BPT / BPN / BCG / BCGD / BCGD / BCGR / BEND / BBR / ECT

Based on the value selected in the parameter 'Interface Level', the following information will be written to the interface file

Interface Level Value	Usage
EEM + EASD	Primary assignment and related data base tables are loaded. This level will perform IDIF Record Type 'Detail Record' for each primary assignment information, i.e. write one entry per employee
EEM + EASD + Contacts	Primary assignment and related data base tables are loaded. This level will perform IDIF Record Type 'Detail Record' for each primary assignment information, i.e. write one entry per employee. Then the Contacts information for this employee will be loaded and perform IDIF Record Type 'Detail Level 1 to 5' for each Contact information, i.e. generate all contact entries for this employee
BE Plans	Primary assignment and BE related data base tables are loaded. This level will perform IDIF Record Type 'Detail Record' for each BE plan, i.e. write one entry per employee for each BE plan
BE + Contacts	Primary assignment and BE related data base tables are loaded. This level will perform IDIF Record Type 'Detail Record' for each BE plan, i.e. write one entry per employee for each BE plan. Then the Contacts information for this BE plan will be loaded and perform IDIF Record Type 'Detail Level 1 to 5' for each Contact information, i.e. generate all contact entries for this BE plan.
BE + Pay Lines	Not supported in UEEF, used by UPNVPERS
GAPERS/GATRS	Not supported in UEEF, used by UBEF

Update Records

When UEEF is run in non-trial mode, Record Type '92-Update Record' will be processed at the appropriate levels to check if the User Defined Fields (UDF) are to be updated for the associated Data Base Tables

---

UEEF to Extract Changes Only#

The Generic Employee Interface (UEEF) may be used as a data extraction process that selects only the changed data. Quite often third party vendors will not accept all records being transmitted with each transfer. The UEEF will filter extracted data based on a specified list of tables that have changed after a given date.

Turn on Change Logging#

In order for the extracted data to be filtered by changes a system administrator must first turn on 'Logging' on the tables they wish to pick up changes for. This is done in IMTD and IMCD.

Setting up logging on tables and columns should only be done by an administrator since this can have an impact on performance. Please refer to the Detailed Change Auditing document for instructions on how to configure this

Process UEEF with Changes Only#

Review the above section for detailed information on how to set up the interface file format for the UEEF function. Once the interface file format has been set up and the logging has been turned on, you are now able to run UEEF to extract changes only data.

In order for UEEF to extract changes only two new parameters have been added:

1. Changed Since:
2. Changed Tables:

If you need to run an exception level 9 for additional trace, you need to supply a person code. If you do not do so, there will be a warning message in the report indicating that due to the volume of trace messages, the exception level is internally reset to 1 and that if you need to run with level 9, to enter an employee to be traced.

---

Report Parameters#

Report Parameters
Entity	Must enter one entity. (Mandatory)
As Of Date	This date is used to retrieve employee information where a date is needed
Sort By Active EEs	Check this toggle to sort inactive employees first
Sort People By	You should sort employees by Last Name/First Name, however you may sort by employee's pay destination or sort by Person code. Lexicon X_PERSON_SORT values
ER Address Location	Allows you to enter an overridden Location to retrieve the Employer Address.(Optional)
Changed Since	This date field is used to filter the P2K_AM_CHANGE_LOGS table to only show data changed since this date. When this parameter is left blank, the interface process will not be filtered by the change logs
Changed Tables	If a table is selected, the system will only look for changes that have occurred in the specified table. More than one table may be selected at a given time. If there is no table selected and if a changed 'Since' date has been supplied, the system will not export any rows. Tables that are currently supported are: P2K_HR_IDENTITIES, P2K_HR_PERSONALS, P2K_HR_EMPLOYMENTS, P2K_HR_ASSIGNMENTS, P2K_HR_ASSIGNMENT_DETAILS, P2K_PR_PAYMENT_RULE_DETAILS, P2K_PR_US_PAY_RULES
Trial Run	Optional toggle to indicate if the UDFs are to be updated for the UEEF run. The value of 'Y' or 'N' is always returned in this parameter field. To run in non-Trial mode (Update mode), you should define IDIF Record Type '92-Update Record' to update UDFs
Interface Format Code	Enter the Interface code from IDIF screen. (Mandatory)
Interface Level	Specify the level for the Interface file to be produced. (Mandatory) Lexicon X_INTERFACE_LEVEL
Directory Name	Enter a valid directory name
File Name	Enter a file name or use the default file name from IDIF screen
Write Append to File	Provides the option to write a file or append to an existing one.
Exception Level	You should always run with Exception level unless for tracing. In Trace Level 1, the employee Header with Person Code and Employee Name are displayed with performance time, this can be used for Progress bar or to locate employee with problem. In Trace Level 2, the BE plans are displayed after employee header information

Report Filters
People List	Please specify if People list is to be used. (Optional)
Person	Enter one or more Person Codes. (Optional)
Location	Enter one or more Location codes. (Optional)
Auth Area	Enter one or more Authorization Areas. (Optional)
Department	Enter one or more Department Codes. (Optional)
Org Level Type	Enter one or more Org Level Types. (Optional)
Org Level	Enter one or more Org Level within Org Level Types. (Optional)
Unit	Enter one or more Unit codes. (Optional)
Group	Enter one or more Group codes. (Optional)
Payroll	Enter one or more Payroll codes. (Optional)
Employment Status	Enter one or more Employment Statuses. (Optional)
Termination Reason	Enter one or more Termination Reasons. (Optional)
Plan Type	Applicable if Interface Level = 'BE plans' or 'BE + Contacts'. (Optional)
Plan	Applicable if Interface Level = 'BE plans' or 'BE + Contacts'. (Optional)

---

Notes #

Click to create a new notes page