UBRETRO

RETROACTIVE BENEFIT EARNINGS AMOUNTS#

Features#

The UBRETRO facility was designed to calculate retro amounts on benefit deductions when an employee receives a pay increase. Benefit deductions may need to be recalculated to include the retro earnings.

The standard retroactive pay program UPRETRO will calculate the difference between the old and new wage rates and insert a pay line into the current period's pay header for each pay line that was evaluated.

UPRETRO/UBRETRO key processing differences#

UPRETRO and UBRETRO work differently with regards to pay header requirements.

In the case of UPRETRO the program will include all the old pays that are to have retro calculated. Prior to launching UPRETRO all the pay’s that will be processed will be displayed using the “List” button on UPRETRO.

UPRETRO will create a new pay if there is no applicable pay header or will update an existing pay header if no applicable pay header can be found.

UBRETRO behaves differently in that it does not create a pay header. Instead prior to processing, UBRETRO requires the creation of a single "To Be Audited" pay for the specific pay period in which the retro amounts are to appear.

Therefore the “Trigger BE Retro" toggle found on IEAS must be enabled on a EASD record that has effective and expiry dates that fall within the specified pay period start and end dates on the pay header selected.

If there are no "To Be Audited" pays that fall in period specified on the EASD records, than UBRETRO will not process.

New Custom Functions#

Two New Custom Functions

These new custom functions have been created to be used with UserCalcs which allow us to determine an employee's wage rate and premium rate based on dates defined in the UserCalc. These new functions are defined in the lexicon 'X_UC_FUNCTIONS'. If the functions are not listed in X_UC_FUNCTIONS lexicon, they can be manually added to the lexicon in IMLN

The function 'P2K_CF_WAGE_RATE' will pass the wage rate from the employee's assignment as of the date found in the Global Variable 'CF WAGE DATE'.

The function 'P2K_CF_PREMIUM' will pass the value of an employee's premium from their assignment as of the date found in the Global Variable 'CF PREMIUM DATE' and for the premium type defined in the Global Variable 'CF PREMIUM TYPE'.

These calculations are based on the employee's Prime Assignment only.

The Global Variables must be named and created exactly as shown below:
CF PREMIUM DATE - this is a 'DATE' type global variable
CF PREMIUM TYPE - this is a 'CHAR' type global variable
CF WAGE DATE - this is a 'DATE' type global variable

Sample User Calculation#

Global Variables are needed to invoke the new custom function logic available in UserCalcs. They must be named exactly as shown below:

Usercalc Example: Capture wage rate and premium rate as of pay issue date
The following UserCalc was written to capture the employee's wage rate and premium rates as per the Pay Issue Date and return the combined amounts to be used in the benefit calculation. This is a 'Function' type UserCalc and will return the value of the wage rate plus premium rate to the appropriate benefit component.

LINECMD TYPE 1OPERAND 1 OPERTYPE 2OPERAND 2 TYPE 3OPERAND 3IF GO TOELSE GO TONOTES
100 LET $G CF WAGE DATE EQ DB PPH.PAY_ISSUE_DATE 110
110 LET V BASE WAGE EQ CF P2K_CF_WAGE_RATE 200
200 LET $G CF PREMIUM DATEEQ DB PPH.PAY_ISSUE_DATE 210
210 LET $G CF PREMIUM TYPEEQ A CCR REG 220
220 LET V CCR EQ CF P2K_CF_PREMIUM 300
300 LET $G CF PREMIUM DATEEQ DB PPH.PAY_ISSUE_DATE 310
310 LET $G CF PREMIUM TYPEEQ A CORR_ASSIGN 320
320 LET V CORR ASSIGN EQ CF P2K_CF_PREMIUM 400
400 LET $G CF PREMIUM DATEEQ DB PPH.PAY_ISSUE_DATE 410
410 LET $G CF PREMIUM TYPEEQ A HPL 420
420 LET V HPL EQ CF P2K_CF_PREMIUM 500
500 LET $G CF PREMIUM DATEEQ DB PPH.PAY_ISSUE_DATE 510
510 LET $G CF PREMIUM TYPEEQ A LPL 520
520 LET V LPL EQ CF P2K_CF_PREMIUM 600
600 LET V BENEFIT WAGE ADD V BASE WAGE V CCR 610
610 LET V BENEFIT WAGE ADD V BENEFIT WAGE V CORR ASSIGN 620
620 LET V BENEFIT WAGE ADD V BENEFIT WAGE V HPL 630
630 LET V BENEFIT WAGE ADD V BENEFIT WAGE V LPL 99999
99999 RET V BENEFIT WAGE

Calculate Retro Benefit Amounts#

The function UBRETRO was developed to process retro calculation amounts on benefit components. Benefit amounts requiring a retro calculation must have been generated during the benefit process in UPCALC in order for UBRETRO to process and re-calculate the retro benefit amounts. Pay components requiring a retro calculation must have a "Retro PC' defined. These retro pay components may need to be added to elements (i.e. Total Deductions, Pre Tax Elements, etc..)

Caveats

The following can be done if UBRETRO was run in update mode and needs to be rerun:

Option 1

Option 2

Set Up Requirements#

Pay_Components
The UBRETRO program will only process for pay components attached to benefit plans that have a 'Retro' PC attached to the 'Retro Pay' tab on IPPC. It is important to update the appropriate element if new 'retro' pay components are created.
High Line Recommendations
_

Retro Benefit Calculations Based on Earnings
#

When an employee receives a retroactive pay increase, their benefit deductions may need to be re-calculated to include the retro earnings.

The standard retroactive pay program (UPRETRO) will calculate the difference between the old and new wage rates and will insert a pay line into the current period's pay header for each pay line that was evaluated. In order to ensure that retro wages are used in the benefit calculation and are picked up in the correct period a UserCalc (as shown below) is required to capture the retro earnings.

The UserCalc example listed below us the Part Time Pension calculation and is associated to B0320 on the PT_PENS plan

LINECMD TYPE 1OPERAND 1 OPERTYPE 2OPERAND 2 TYPE 3OPERAND 3IF GO TOELSE GO TONOTES
100 LET V Base Earnings EQ EC PT_STD_EARN 110 The purpose of this usercalc is to capture the earnings used in part time pension calculations. Only retro earnings that have dates within the pay period should be processed. Retro earnings should be used to calculate 'retro' benefits for the pay period they are earned in
110 LET V ELPL.BEGIN_DATE EQ $S PERIOD_START_DATE 120
120 LET V ELPL.END_DATE EQ $S PERIOD_END_DATE 130
130 LET V RETRO EARNINGS ELPLET RETRO EARNINGS 140
140 LET V TOTAL EARNINGS ADD V BASE EARNINGS V RETRO EARNINGS 99999
99999 RET V TOTAL EARNINGS

Retroactive Benefit Calculation Program#

Report Parameters
Entity Mandatory, LOV Available
Payroll Mandatory, LOV Available
Pay Period Mandatory, Date LOV Available
If there is no pay header available for the employee, the retro amount will not be calculated
Retro Start Period Mandatory, LOV Available
Retro End Period Mandatory, LOV Available
Triggered Employees Mandatory. Yes/No
Restricts the list of employees to only those who have the 'Trigger BE Retro' toggle 'On' at the assignment level
Plan Coverages Mandatory, Lexicon Available
Benefit Plans Mandatory, Lexicon Available
Trial Optional, Toggle
If 'Off' then the update is committed
If 'On' the update is not committed and UBRETRO may be processed again
Post Negative Retro Optional, Toggle
If 'Yes' then negative amounts will be posted on the pay header
If 'No' the negative amounts will not be posted
In both cases exception messages will appear on the report
Exception Level Mandatory, LOV Available
Defaults to ‘Exceptions Only’, may be changed to allow users to view higher-level exception messages (if problems occur, or to assist in set up and testing).
User Comment Allows users to enter a short comment that will be visible on the report

Report_Filters
People List Code People Lists may be used to select groups of employees based on specific data
NOTE: This filter looks at the employee's assignment details based on the pay period end date of the pay period defined in the 'Pay Period' parameter
Person Individual employees may be selected for processing
Batch Number Individual bath numbers may be selected for processing
Department Individual departments may be selected for processing
NOTE: This filter looks at the employee's assignment details based on the pay period end date of the pay period defined in the 'Pay Period' parameter
Unit Individual units may be selected for processing
NOTE: This filter looks at the employee's assignment details based on the pay period end date of the pay period defined in the 'Pay Period' parameter
Group Individual groups may be selected for processing
NOTE: This filters looks at the employee's assignment details based on the pay period end date of the pay period defined in the 'Pay Period' paramater

Notes #

Click to create a new notes page