This is version 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 . It is not the current version, and thus it cannot be edited.

Back to current versionRestore this version

US TAXATION SUPPLEMENTAL PAY PROCESSING#

Overview#

This document describes the US Supplemental Pay Processing that is used in the Symmetry Tax Engine (STE).

Federal Level#

Federal Supplemental Tax Methods#

• The Supplemental tax for federal withholding is computed using the federal percentage (i.e. 25% of wages on the first $1,000,000 in supplemental wages and 35% of wages on any amount over $1,000,000).
• At the Employee level on IPRLU, the employee specifies the employee's Federal Supplemental Tax Method that determines if the Supplemental tax should be calculated for this employee.
• If Federal Supplemental tax is to be calculated for an employee, UPCALC will internally pass the 'FLAT' Percentage method to Symmetry that will calculate FSP tax using the federal 25% or 35%.
• Regardless if the Supplemental Wages are paid WITH or WITHOUT the Regular Wages, Federal Supplemental tax is calculated using this 'FLAT' Percentage method by Symmetry
  
  For Example: Sup is Paid with Regular Wages, when FSP Method = 'Flat Percent Method'
  
  US_Taxation _Supplemental Pay Processing_01.JPG
  
  PC 6010 FSP Tax 916.96 x 25%= 229.24

Prorating Taxable Benefits for Federal Supplemental Pay#

When a supplemental pay is paid with a regular pay, the taxable benefit deductions may be prorated between both Federal and Supplemental wages. This is controlled by the set up of elements attached to specific pay components as indicated below.

Prorating the taxable benefit deductions will cause a slight difference in the tax calculated. Clients will need to consider their business processes to determine if they would prefer the taxable benefits to be prorated or not. Some clients may want to prorate section 125 deductions and not 401k deductions.

UPCALC reviews the set up of the following Federal PC Usages to determine if it should prorate the taxable benefit deductions:

6053 - Pre-FWT 125 Exemption - Regular Tax (PPE)

6054 - Pre-FWT 401K Exemption - Regular Tax (PPE)

6056 - Pre-FWT 125 Exemption - Supplemental Tax (PPE)

6057 - Pre-FWT 401K Exemption - Supplemental Tax (PPE)

The proration logic will occur when:

• No supplemental element is associated to the Supplemental PC Usages listed above (i.e. 6056, 6057), UPCALC will prorate all of the section 125 and 401k deduction amounts between Regular and Supplemental.
• A supplemental element has been associated to the Supplemental PC Usages listed above, the element is defined with PCs and those PCs have amounts, UPCALC will use the element and prorate the taxable benefits defined in the element.

The proration logic will NOT occur when:

• A supplemental element has been associated to the Supplemental PC Usages but the erlement is empty (no PCs defined).
• A supplemental element has been associated to the Supplemental PC Usages but the PCs within the element do not have amounts in the pay.

Set Up Options to Prorate Section 125 Taxable Benefits between Federal and Supplemental:

1. In IPPC do not associate an element to PC Usage 6056 - Pre-FWT 125 Exemption - Supplemental Tax (PPE).This will cause UPCALC to prorate all of the section 125 taxable benefit deductions that are defined in the element tied to PC Usage 6053 Pre-FWT 125 Exemption - Reg Tax (PPE).
2. If only certain Sect 125 deductions should be prorated, define an element in IPPE that only lists the 125 deductions that should be prorated between Federal and Supplemental. In IPPC, attach this element to the Pay Component tied to PC Usage6056 - Pre-FWT 125 Exemption - Supplemental Tax (PPE)

Set Up Options to Prorate 401k Taxable Benefits between Federal and Supplemental:

1. In IPPC do not associate an element to PC Usage 6057 - Pre-FWT 401K Exemption - Supplemental Tax (PPE). This will cause UPCALC to prorate all of the 401k/457 taxable benefit deductions that are defined in the element tied to 6054 Pre-FWT 401K Exemption - Reg Tax (PPE)
2. If only certain 401k or 457 deductions should be prorated between Federal and Supplemental, define an element in IPPE that only lists the 401k and 457 deductions that should be prorated. In IPPC, attach this element to the pay component tied to PC Usage 6057 - Pre-FWT 401K Exemption - Supplemental Tax (PPE)

After UPCALC or Trial Calc, go to the Pay Jurisdiction tab in IPPH, where you can click the Jurisdiction '00-000-0000 Federal' entry and scroll down the 'Tax Identifier' list. The prorated 125 and 401K amounts are stored for these Benefit usages with description 'Pre-FWT 125 Exemption - Supplemental Tax (PPE)' etc.

The following is an example of proration:

PC 1010 Regular Earnings	2307.6900
PC 2002 Bonus $	1000.0000
PC 4020 Medical EE (sect125)	50.0000
PC 4041 401K Dedn	33.0800
PC 6000 Fed Tax	393.2000
PC 6003 Fed Supp Tax	243.7200
PC 8000 Fed Tax Earns	2249.7300
PC 8010 Fed Sup Earns	974.8800
PC 6055 Res SIT Tax	138.0000
PC 6057 Res Supp Tax	61.0000
PC 8055 Res SIT Earn	2249.7300
PC 8058 Res Supp Earn	974.8800
PC 8400 Pre-Fed Earnings	2307.6900
PC 8403 Pre-Fed Sup Ern	1000.0000
PC 8153 Pre Fed 125 Earn	34.8800
PC 8154 Pre Fed 401 Earn	23.0800
PC 8156 Pre Fed Sup 125	15.1200
PC 8167 Pre FSP 401 Earn	10.0000
PC 8551 Pre-SIT Earnings	2307.6900
PC 8453 Pre-SIT Suppl Earns	1000.0000
PC 8353 Pre-SIT 125	34.8800
PC 8354 Pre-SIT 401/403/457	23.0800
PC 8356 Pre-SIT Supp 125	15.1200
PC 8357 Pre-SIT Supp 401K	10.0000

UPCALC prorated both sect 125 and 401k taxable benefits against regular and supplemental wages for federal and state.

PC 4020 Medical EE (sect125) $50.0000

PC 8153 Pre Fed 125 Earn	34.8800 prorated amt on reg wages
PC 8156 Pre Fed Sup 125	+ 15.1200 prorated amt on supp wages
	50.00

PC 4041 401K Dedn $33.0800

PC 8154 Pre Fed 401 Earn	23.0800 prorated amt on reg wages
PC 8167 Pre FSP 401 Earn	+ 10.0000 prorated amt on supp wages
	33.08

The Pre-Fed Earnings are reduced accordingly:

Pre-Fed Earnings	2307.6900
Pre Fed 125 Earn	-34.8800
Pre Fed 401 Earn	-23.0800
Fed Tax Earns	2249.7300

The Pre-Fed Supp Earnings are reduced accordingly:

Pre-Fed Sup Ern	1000.0000
Pre Fed Sup 125	- 15.1200
Pre FSP 401 Earn	- 10.0000
Fed Sup Earns	974.8800

The FIT Tax is based on $2249.73 The FSP Tax is based on $974.88

On the Pay Jurisdiction tab in IPPH, you can click the Jurisdiction '00-000-0000 Federal' entry and scroll down the 'Tax Identifier' list, the prorated 125 and 401K amounts are stored as 'Pre-FWT 125 Exemption - Supplemental Tax (PPE)' etc.

The following is an example of the same pay, without proration:

PC 1010 Regular Earnings	2307.6900
PC 2002 Bonus $	1000.0000
PC 4020 Medical EE (sect125)	50.0000
PC 4041 401K Dedn	33.0800
PC 6000 Fed Tax	386.9200
PC 6003 Fed Supp Tax	250.0000
PC 6055 Res SIT Tax	136.0000
PC 6057 Res Supp Tax	63.0000
PC 8000 Fed Tax Earns	2224.6100
PC 8010 Fed Sup Earns	1000.0000
PC 8055 Res SIT Earn	2224.6100
PC 8058 Res Supp Earn	1000.0000
PC 8400 Pre-Fed Earnings	2307.6900
PC 8403 Pre-Fed Sup Ern	1000.0000
PC 8153 Pre Fed 125 Earn	50.0000
PC 8154 Pre Fed 401 Earn	33.0800
PC 8551 Pre-SIT Earnings	2307.6900
PC 8453 Pre-SIT Suppl Earns	1000.0000
PC 8353 Pre-SIT 125	50.0000
PC 8354 Pre-SIT 401/403/457	33.0800

UPCALC did not prorate the sect 125 or 401k deductions against regular and supplemental wages.

The Pre-Fed Earnings are reduced accordingly:

Pre-Fed Earnings	2307.6900
Pre Fed 125 Earn	-50.0000
Pre Fed 401 Earn	-33.0800
Fed Tax Earns	2224.6100

The Pre-Fed Supp Earnings are not reduced since the sect 125 and 401k taxable benefits were not prorated. Pre-Fed Sup Ern 1000.0000

The FIT Tax is based on $2224.6100 The FSP Tax is based on $1000.0000

State Level#

State Supplemental Pay#

• At the State level, Symmetry Tax Engine uses the following tax methods to calculate tax on supplemental wages: **Flat
  • Current Aggregation
  • Previous Aggregation

• UPCALC needs to pass one of these Supplemental Tax Methods to the Symmetry Tax Engine

• For a state that has a specific Supplemental Flat percentage, the Flat Rate method can be used.

• Not all states have a specific flat percentage for Supplemental wages, for these states, the 'Current Aggregation' method should be used.

• The current aggregation method adds the regular wages to the supplemental wages and computes withholding using the annualized method on the combined total. The difference between the withholding on the combined total (regular and supplemental) and the withholding on regular wages is the supplemental wage withholding.

• The 'Previous Aggregation' method will not be supported until there is a need to use this method.

• Below, is a list showing states that are with and without the Supplemental Tax Percent

• From this list, the following states do not supply a Flat percent and therefore the 'Current Aggregation' method is used in order to calculate State Sup Tax:
  
  AK, AZ, CT, DE, FL, HI, KY, LA, MA, MD, MS, NH, NJ, SD, TN, TX, UT, WA, WY, PR
• From this list, the remaining states will use the 'Flat' method in order to calculate State Sup Tax
• From this State list, the Default Supplemental Tax Method is set for each state internally by the system.
• Depending on if the Supplemental Wages are paid WITH or WITHOUT the Regular Wages, each state may provide a different method to calculate the State Supplemental Tax. (Please read below.)
• At the Employee level on IPRLU, the employee will specify the State Supplemental Tax Method that determines if the Supplemental tax is to be calculated for this employee for a pay.
• If State Supplemental tax is to be calculated by Symmetry, then the Default Sup Tax Method of 'Flat' or 'Current Aggregation' method will be passed to Symmetry.
• On IPTUP for each State, you can manually override the default Supplemental Tax Method to 'FLAT' or 'CURRAGG' depending on the method you prefer to tax by. Then on the IPRLU - State Miscellaneous tab, the employee may override this State level default Supplemental tax method

The following table lists the States that are with and without the Supplemental Tax Percent as of Sept 2006. US_Taxation _Supplemental Pay Processing_02.JPG

State Supplemental Tax - WITH or WITHOUT Regular Pay#

• Depending on if the Supplemental wages are paid WITH or paid WITHOUT the Regular wages, each State may have different methods to handle Supplemental taxes. Please refer to this link:
  
  http://www.payroll-taxes.com/PayrollTaxes/supplemental_states.htm
  
  An example for the state of Maryland below shows the differences of the State Supplemental Tax results when the 'FLAT' or 'CURRAGG' tax methods are used.

Maryland GEO: 24-001-1713506 Allegany
Paid with Regular Wages	Paid at Different Time than Regular Wages
Add to regular wages and withhold on total	Withhold at 6.25% plus rate applicable to county of residence Or add to regular wages, compute tax on total, and subtract tax withheld on regular wages

• Local Level Supplemental Tax method uses the same State Level Supplemental Tax method'
  
  For Example: State of Maryland:
  1. Supplemental is paid with Regular wages, when SSP method = 'Flat Percent Method'
     • this actually uses the 'Paid at Different Time than Regular Wages' method
       
       US_Taxation _Supplemental Pay Processing_03.JPG
       
       Maryland Sup Rate 916.96 x 6.25% = 57.31
       Local Rate for Allegany County, MD 916.96 x 0.0305 = 27.97
       = 85.28: PC 6052
       Res SIT + Res Supp Tax 214.07 + 85.28 = 299.35
       Note: Higher than 'CURRAGG' method
  2. Sup is paid with Regular wages, when SSP Method = 'Current Aggregation'
     
     US_Taxation _Supplemental Pay Processing_04.JPG
     
     Res SIT + Res Supp Tax 214.07 + 71.52 = 285.59
     
     Note: same result as Vertex below
  3. Sup is paid with Regular wages, Vertex Supplemental tax for Maryland:
     
     US_Taxation _Supplemental Pay Processing_05.JPG
     
     Work SIT = Res SIT + Res Supp Tax = 285.59

In conclusion for Maryland:

• When Sup is paid WITH Regular Wages, the 'Current Aggregation' method should be used.
• When Sup is paid WITHOUT Regular Wages, the 'Current Aggregation' or 'Flat' method can be used.

IPUTP - Supplemental Tax Method by State#

• When UPUTR is run, UPUTR automatically loads in two Miscellaneous Identifiers for each State to provide the Default Supplemental Tax Method:
  
  SUP_PAID_WITH_REG
  SUP_PAID_WITHOUT_REG
  
  US_Taxation _Supplemental Pay Processing_06.JPG
  
  Default Value - this contains 'FLAT' or 'CURRAGG' depending on each state
  Provided By - always 'Internal'. When UPCALC is passing State Misc Parms to Symmetry, UPCALC will not pass the State Misc Parm that are with 'Provided By' = 'Internal'

• In UPCALC, if an employee is paid Supplemental Wages with the Regular Wages in the same pay, then the 'SUP_PAID_WITH_REG' default value will be used

• In UPCALC, if an employee is paid Supplemental Wages without the Regular Wages in the same pay, then the 'SUP_PAID_WITHOUT_REG' default value will be used

IPRLU - Supplemental Tax Method by Employee#

• At the Employee level, the employee may optionally override the default State Sup Tax Method on IPUTP for:
  SUP_PAID_WITH_REG
  SUP_PAID_WITHOUT_REG
• If there is no override by employee, there is no need to set up these Misc Tax Parm
  US_Taxation _Supplemental Pay Processing_07.JPG
  
• For IPRLU Federal and State Tab Suppl Tax Method explanation, please refer to: PR_US_IPRLU_methods_v1.0.doc or later
• when an employee is paid with Supplemental wages, the IPRLU Federal and State Tab Suppl Tax Method determines if the Supplemental Wages are to be taxed or not, and which Suppl Tax Method is to be used
• once when the State Supplemental tax is to be calculated by Symmetry, then IPUTP State specific tax method from SUP_PAID_WITH_REG or SUP_PAID_WITHOUT_REG will be passed to Symmetry for calculation depending on if the Supplemental wages are paid with or without Regular wages, therefore FLAT or CURRAGG is passed

Prorating Taxable Benefits for State Supplemental Pay#

Like with the Federal Supplemental Pay, taxable benefits may be prorated between regular state wages and supplemental wages when both are paid together. This is controlled by the set up of elements attached to specific pay components as indicated below.

Prorating the taxable benefit deductions will cause a slight difference in the tax calculated. Clients will need to consider their business processes to determine if they would prefer the taxable benefits to be prorated or not. Some clients may want to prorate section 125 deductions and not 401k deductions.

UPCALC reviews the set up of the following State PC Usages to determine if it should prorate the taxable benefit deductions: If the State Level Benefit PC Usages are not set up on IPPC, then the Federal Level Benefit PC Usages that are described in the Federal section will be used.

6653 - Pre-State 125 Exemption - Regular Tax (PPE) 6654 - Pre-State 401 Exemption - Regular Tax (PPE) 6656 - Pre-State 125 Exemption - Supplemental Tax (PPE) 6657 - Pre-State 401 Exemption - Supplemental Tax (PPE)

The proration logic will occur when:

• No Supplemental Element is associated to the Supplemental PC Usages listed above, UPCALC will prorate all of the section 125 and 401k deduction amounts between Regular and Supplemental
• A Supplemental Element has been associated to the Supplemental PC Usage, the Element is defined with PCs and those PCs have amounts, UPCALC will use the Element and prorate the taxable benefits defined in the element.

The proration logic will NOT occur when:

• A Supplemental Element has been associated to the Supplemental PC Usages listed above but the Element is Empty (no PCs defined).
• A Supplemental Element has been associated to the Supplemental PC Usages listed above but the PCs within the Element do not have amounts in the pay.

Set Up Options to Prorate Section 125 Taxable Benefits between State Regular Wages and Supplemental:

1. In IPPC do not associate an element to PC Usage 6656 - Pre-State 125 Exemption - Supplemental Tax (PPE).

This will cause UPCALC to prorate all of the section 125 taxable benefit deductions that are defined in the element tied to PC Usage 6653 Pre-State 125 Exemption - Regular Tax (PPE).

1. If only certain Sect 125 deductions should be prorated, define an element in IPPE that only lists the 125 deductions that should be prorated between Federal and Supplemental. In IPPC attach this element to the Pay Component tied to PC Usage 6656 - Pre-State 125 Exemption - Supplemental Tax (PPE)

Set up Options to Prorate 401k Taxable Benefits between Federal and Supplemental:

1. In IPPC do not associate an element to PC Usage 6657 - Pre-State 401 Exemption - Supplemental Tax (PPE).

This will cause UPCALC to prorate all of the 401k/457 taxable benefit deductions that are defined in the element tied to PC Usage 6654 Pre-State 401 Exemption - Regular Tax (PPE)

1. If only certain 401k or 457 deductions should be prorated between Federal and Supplemental, define an element in IPPE that only lists the 401k and 457 deductions that should be prorated. In IPPC attach this element to the Pay Component tied to PC Usage 6657 - Pre-State 401 Exemption - Supplemental Tax (PPE)

After UPCALC or Trial Calc, on IPPH - Pay Jurisdiction tab, user can click the Jurisdiction entry for the appropriate Jurisdiction name and scroll down the 'Tax Identifier' list, the prorated 125 and 401K amounts are stored for these Benefit usages with description 'Pre-State 125 Exemption - Reg Tax (PPE)', etc.

The following is an example of proration:

PC 1010 Regular Earnings	2307.6900
PC 2002 Bonus $	1000.0000
PC 4020 Medical EE (sect125)	50.0000
PC 4041 401K Dedn	33.0800
PC 6000 Fed Tax	393.2000
PC 6003 Fed Supp Tax	243.7200
PC 8000 Fed Tax Earns	2249.7300
PC 8010 Fed Sup Earns	974.8800
PC 6055 Res SIT Tax	138.0000
PC 6057 Res Supp Tax	61.0000
PC 8055 Res SIT Earn	2249.7300
PC 8058 Res Supp Earn	974.8800
PC 8400 Pre-Fed Earnings	2307.6900
PC 8403 Pre-Fed Sup Ern	1000.0000
PC 8153 Pre Fed 125 Earn	34.8800
PC 8154 Pre Fed 401 Earn	23.0800
PC 8156 Pre Fed Sup 125	15.1200
PC 8167 Pre FSP 401 Earn	10.0000
PC 8551 Pre-SIT Earnings	2307.6900
PC 8453 Pre-SIT Suppl Earns	1000.0000
PC 8353 Pre-SIT 125	34.8800
PC 8354 Pre-SIT 401/403/457	23.0800
PC 8356 Pre-SIT Supp 125	15.1200
PC 8357 Pre-SIT Supp 401K	10.0000

UPCALC prorated both the sect 125 and 401k taxable benefits against regular and supplemental wages for both Federal and State.

PC 4020 Medical EE (sect125) $50.0000
PC 8353 Pre-SIT 125	34.8800 prorated amt on reg wages
PC 8356 Pre-SIT Supp 125	+ 15.1200 prorated amt on supp wages
	50.00

PC 4041 401K Dedn $33.0800
PC 8354 Pre-SIT 401/403/457	23.0800 prorated amt on reg wages
PC 8357 Pre-SIT Supp 401K	+ 10.0000 prorated amt on supp wages
	33.08

The Pre-State Earnings are reduced accordingly:

Pre-SIT Earnings	2307.6900
Pre-SIT 125	- 34.8800
Pre-SIT 401/403/457	- 23.0800
RES SIT Earns	2249.7300

The Pre-Fed Supp Earnings are reduced accordingly:

Pre-SIT Suppl Earns	1000.0000
Pre-SIT Supp 125	- 15.1200
Pre-SIT Supp 401K	- 10.0000
Fed Sup Earns	974.8800

The SIT Tax is based on $2249.73 The SSP Tax is based on $974.88

The following is an example of the same pay, without proration:

PC 1010 Regular Earnings	2307.6900
PC 2002 Bonus $	1000.0000
PC 4020 Medical EE (sect125)	50.0000
PC 4041 401K Dedn	33.0800
PC 6000 Fed Tax	386.9200
PC 6003 Fed Supp Tax	250.0000
PC 6055 Res SIT Tax	136.0000
PC 6057 Res Supp Tax	63.0000
PC 8000 Fed Tax Earns	2224.6100
PC 8010 Fed Sup Earns	1000.0000
PC 8055 Res SIT Earn	2224.6100
PC 8058 Res Supp Earn	1000.0000
PC 8400 Pre-Fed Earnings	2307.6900
PC 8403 Pre-Fed Sup Ern	1000.0000
PC 8153 Pre Fed 125 Earn	50.0000
PC 8154 Pre Fed 401 Earn	33.0800
PC 8551 Pre-SIT Earnings	2307.6900
PC 8453 Pre-SIT Suppl Earns	1000.0000
PC 8353 Pre-SIT 125	50.0000
PC 8354 Pre-SIT 401/403/457	33.0800

UPCALC did not prorate the sect 125 or 401k deductions against regular and supplemental wages.

The Pre-State Earnings are reduced accordingly:

Pre-SIT Earnings	2307.6900
Pre-SIT 125	- 50.0000
Pre-SIT 401/403/457	- 33.0800
RES SIT Earns	2224.6100

The Pre-SIT Supplemental Earnings are not reduced since the sect 125 and 401k taxable benefits were not prorated. Pre-SIT Suppl Earns $1000.0000

The SIT Tax is based on $2224.6100 The SSP Tax is based on $1000.0000

---

Notes #

Click to create a new notes page