[{TableOfContents }]
!!!CREATE PAY HISTORY INTERFACE
The system allows you to generate an interface file from pay history information for the pay headers and the associated information such as Pay Lines, Pay Line Details, Pay Amounts or the Journal Entries depending on the interface level. The employee's basic information such as Personals, Employments, Prime Assignments, Entities, Locations, Jobs, Positions, Departments, Units, Groups can also be used for the interface file. 

You define the interface file layout on [IDIF] screen.

!!Setup Step 1 - Define Lexicons in [IMLN]
The following lexicons are provided by [{$applicationname}] and used for UPPHF Pay History Interface.
![X_INTERFACE_TYPE]
The following value from X_INTERFACE_TYPE must be used for [IDIF] screen Interface Type field:32 - Pay History Interface
*[X_INTERFACE_UPPHF]
X_INTERFACE_UPPHF is used on UPPHF selection criteria screen for Interface Level parameter:
;01 - Pay Headers:Generate interface file with Pay Headers, Pay Amounts and employee basic information.\\This is used when Interface File requires Element amounts without detail information from Pay Lines, performance for this Interface level will be better than '02' level.
;02 - Pay Headers + Pay Lines:Generate interface file with Pay Headers, Pay Lines, Pay Line Details, Pay Amounts and employee basic information.\\This is used when Interface File requires Amounts or Element amounts from Pay Lines level and information such as Cost Center, Work Order etc, performance for this Interface level will be slower than '01' level.
;10 - Journal Entries:Generate interface file with Pay Headers, Journal Entries, Journal Details and employee basic information\\This is used when Interface File requires Journal Entries information, performance for this Interface level will be slower than '01' level

*[X_INF_VARIABLE_NAME]
X_INF_VARIABLE_NAME contains a list of system defined variables that are eligible by Interface type.  The following list describes each variable and the usage for Interface Type 32 - Pay History Interface.

%%zebra-table
||Saved\\Value||Displayed Value||Source of Data||Comments
| 320001 | Execution ID  | From Execution ID of the [UPPHF] run|
| 320002 | XML Tag  | |Indicates this Rec#/Fld# is for XML tag.\\  \\You should enter the XML tag in the XML Tag field, if XML Tag field is not specified, the field name is used as XML tag.\\  \\e.g. <Request> or </Request> as XML tag.\\  \\You should use one of the following ways to define XML tags:\\1) use 320002-XML tag for all Begin and End tags\\i.e. you specify <Request> and </Request>\\2) use 320604-XML Begin tag and 320605-XML End tag.\\  \\ This allows you to use XML tag option to indicate if the XML tag is mandatory or optional.\\  \\You must not use 320002-XML tag to mix with 320604/320605 definition.
| 320003 | Constant Value  | |You should specify the Constant to be used in [IDIF] Constant Value field
| 320004 | System Date/Time  | The current system date and time with following, select:to_char(sysdate,'DD-MON-YYYY HH24:MI:SS')|You can use derivation expression SUBSTR to retrieve Date Only or Time Only
| 320005 | From Pay Period | This field holds the earliest pay period that have been processed from all pay headers| This can be used for Header or Trailer record
| 320006 | To Pay Period  | This field holds the latest pay period that have been processed from all pay headers|This can be used for Header or Trailer record
| 320007 | Pay Header pph_id  | This field holds the id of the current pay header|This can be used in the derivation expression to call some internal [{$applicationname}] functions that needed the pph.id e.g. call Element function to return the value of an element: To retrieve the value of Element 'HOURS COMP TIME'.\\  \\ In Record# 50, Field#20, Variable Name = 'Pay Header [PPH_ID]', then in derivation expression: P2K_PPAMTS.SPELPAY(~,P2K_PPAMTS.SPGETPEL('HOURS COMP TIME'))
| 320008 | Employment eem_id  | This field holds the id of the current employment record, from [P2K_HR_EMPLOYMENTS]|This can be used in the derivation expression to call some internal functions that needed the eid.id
| 320009 | Identity eid_id  | This field holds the id of the current identity record from [P2K_HR_IDENTITIES]|This can be used in the derivation expression to call some internal functions that needed the [EID_ID]
| 320010 | Person Code | From [P2K_HR_IDENTITIES], [person_code|PERSON_CODE]|
| 320011 | First Name  | From [P2K_HR_IDENTITIES], [first_name|FIRST_NAME]|
| 320012 | Last Name  | From [P2K_HR_IDENTITIES], [last_name|LAST_NAME]|
| 320013 | First,Last Name  |From [P2K_HR_IDENTITIES], [first_name|FIRST_NAME] ', ' [last_name|LAST_NAME] |
| 320014 | Last,First Name  | From [P2K_HR_IDENTITIES], [last_name|FIRST_NAME] ', ' [first_name|FIRST_NAME]|
| 320015 | Trial Run  | From parameter P_TRIAL (Trial Run)|The value of 'Y' or 'N' is always returned in P_TRIAL.\\If NULL is entered, P_TRIAL is set to 'N'
| 320020 | Batch Number  | From [P2K_PR_BATCHES], [batch_number|BATCH_NUMBER]|
| 320030 | Pay Run Number  |From [P2K_PR_PAY_RUNS], [pay_run_number|PAY_RUN_NUMBER] |
| 320031 | Pay Run Sequence  |From [P2K_PR_PAY_HEADERS], [pay_run_sequence|PAY_RUN_SEQUENCE] |
| 320040 | Hired Date  | From [P2K_HR_EMPLOYMENTS], [hire_date|HIRE_DATE]|
| 320041 | Term Date  | From [P2K_HR_EMPLOYMENTS], [termination_date|TERMINATION_DATE]|
| 320042 | Seniority Date  |From [P2K_HR_EMPLOYMENTS], [seniority_date|SENIORITY_DATE] |
| 320043 | First Work Date  |From [P2K_HR_EMPLOYMENTS], [first_work_date|FIRST_WORK_DATE] |
| 320044 | Last Work Date  | From [P2K_HR_EMPLOYMENTS], [last_work_date|LAST_WORK_DATE]|
| 320100 | Pay Header Stage | From [P2K_PR_PAY_HEADERS], [pay_header_stage|PAY_HEADER_STAGE]|
| 320101 | Pay Number  | From [P2K_PR_PAY_HEADERS], [pay_number|PAY_NUMBER]|
| 320102 | Pay Period  | From [P2K_PR_PAY_HEADERS], [pay_period|PAY_PERIOD]|
| 320103 | Pay Period Start  |From [P2K_PR_PAY_PERIODS], [pay_period_start_date|PAY_PERIOD_START_DATE] of the pay header |
| 320104 | Pay Period End Date  |From [P2K_PR_PAY_PERIODS], [pay_period_end_date|PAY_PERIOD_END_DATE] of the pay header |
| 320105 | Pay Issue Date  | From [P2K_PR_PAY_HEADERS], [pay_issue_date|PAY_ISSUE_DATE]|
| 320106 | Period Fiscal  | From Pay Period Fiscal of Pay Header|
| 320107 | Period Fiscal Start  |From Fiscal Start Date of Pay Period Fiscal |
| 320108 | Period Fiscal End  | From Fiscal End Date of Pay Period Fiscal|
| 320109 | Issue Fiscal  | From Pay Issue Fiscal of Pay Header|
| 320110 | Issue Fiscal Start  |From Fiscal Start Date of Pay Issue Fiscal |
| 320111 | Issue Fiscal End  | From Fiscal End Date of Pay Issue Fiscal|
| 320200 | G/L Company Code  | From [P2K_CM_ENTITIES], [GL Company Code|DGC_ID] |
| 320201 | Entity Code  | From [P2K_CM_ENTITIES], [Entity Code|ENTITY_CODE] |
| 320202 | Entity Name  | From [P2K_CM_ENTITIES], [Entity Name|ENTITY_NAME]|
| 320203 | Payroll Code  |From [P2K_PR_PAYROLLS], [Payroll Code|PAYROLL_CODE] |
| 320204 | Payroll Desc  | From [P2K_PR_PAYROLLS], [Payroll description|DESCRIPTION]|
| 320205 | Unit Code  | From [P2K_CM_UNITS], [Unit Code|UNIT_CODE]|
| 320206 | Unit Name  | From [P2K_CM_UNIT_DETAILS], [Unit Name|UNIT_NAME]|
| 320207 | Group Code  | From [P2K_CM_GROUPS],[Group Code|GROUP_CODE] |
| 320208 | Group Desc  | From [P2K_CM_GROUP_DETAILS], [Group Description|DESCRIPTION]|
| 320209 | Department Code  |From Pay Header assignment [Department Code|DEPARTMENT_CODE] on [P2K_CM_DEPARTMENTS] or Pay Line [Department Code|DEPARTMENT_CODE] if exists |
| 320210 | Department Name  | From Pay Header assignment [Department Name|DEPARTMENT_NAME] on [P2K_CM_DEPARTMENT_DETAILS] or Pay Line [Department name|DEPARTMENT_NAME] if exists|
| 320211 | Job Code  | From Pay Header assignment [Job Code|JOB_CODE] on [P2K_CM_JOBS] or Pay Line [Job Code|JOB_CODE] if exists|
| 320212 | Job Title  | From Pay Header assignment [Job Title|JOB_TITLE] on [P2K_CM_JOB_DETAILS] or Pay Line [Job Title|JOB_TITLE] if exists|
| 320213 | Position Code  | From Pay Header assignment [Position Code|POSITION_CODE] on [P2K_CM_POSITIONS] or Pay Line [Position Code|POSITION_CODE] if exists|
| 320214 | Position Title  | From Pay Header assignment [Position Title|POSITION_TITLE] on [P2K_CM_POSITION_DETAILS] or Pay Line [Position Title|POSITION_TITLE] if exists|
| 320215 | Assignment Code  | From Pay Header [assignment Code|ASSIGNMENT_CODE] on [P2K_HR_ASSIGNMENTS] or Pay Line [assignment Code|ASSIGNMENT_CODE] if exists|
| 320216 | Assignment Title  | From Pay Header [assignment Title|ASSIGNMENT_TITLE] on [P2K_HR_ASSIGNMENT_DETAILS] or Pay Line assignment Code Title if exists|
| 320217 | Pay Category Code  | From Pay Header [pay_category_code|PAY_CATEGORY_CODE] on [P2K_PR_PAY_CATEGORIES]|
| 320218 | Check Number  | From Pay Header [Check Number|CHECK_NUMBER] on [P2K_PR_CHECKS]|
| 320219 | Check Amount | From Pay Header [Check Amount|CHECK_AMOUNT] on [P2K_PR_CHECKS]|
| 320220 | User Name  | From Pay Header [User Name|MUS_ID] on [P2K_AM_USERS] |
| 320221 | Work State/Prov  |From Pay Header [Work State/Prov|DSP_ID_WORK] on [P2K_PR_PAY_HEADERS] |
| 320222 | Res State/Prov  | From Pay Header [Residence State/Prov|DSP_ID_HOME] on [P2K_PR_PAY_HEADERS]|
| 320223 | Work GEO Code | From Pay Header [Work Jurisdiction GEO Code|GEO_CODE] on [P2K_CM_TAX_JURISDICTIONS]|
| 320224 | Res GEO Code  | From Pay Header [Residence Jurisdiction GEO Code|DTX_ID_HOME] on [P2K_CM_TAX_JURISDICTIONS]|
| 320225 | Work Jurisdiction  |From Pay Header [Work Jurisdiction| DTX_ID_WORK] on [P2K_PR_PAY_HEADERS]|
| 320226 | Res Jurisdiction  | From Pay Header [Residence Jurisdiction|DTX_ID_HOME] on [P2K_PR_PAY_HEADERS]|
| 320227 | School District  | From Pay Header [School District|DSD_ID] on [P2K_PR_PAY_HEADERS]|
| 320230 | Std Wage (eas) | From Pay Header [Assignment Std Wage|STD_WAGE_RATE]|
| 320231 | Wage Basis (eas)  |From Pay Header [Assignment Wage Basis|STD_WAGE_RATE_BASIS] |
| 320232 | Authorization Code  |Authorization area is from pay header or pay line's assignment, then position, then department|
| 320300 | PC Code  |  |The [PC Code|PC_CODE] of the current pay line detail or pay amount 
| 320301 | PC Abbrev  |  |The [PC Abbreviation|PC_ABBREVIATION] of the current pay line detail or pay amount 
| 320302 | PC Amount  |  |The [PC Amount|AMOUNT] of the current pay line detail or pay amount
| 320303 | Element Code  |  |You should specify the '[Element Code|ELEMENT_CODE]' in [IDIF] Constant Value 
| 320304 | Element PC Value | |You should specify the '[Element Code|ELEMENT_CODE]' in [IDIF] Constant Value.\\If the PC Code of the current pay line detail or pay amount is in the [element|PAY ELEMENTS], then the PC Amount is included
| 320305 | Element Desc|  |You should specify the '[Element Code|ELEMENT_CODE]' in [IDIF] Constant Value 
| 320306 | Element pph Value  | You should specify the '[Element Code|ELEMENT_CODE]' in [IDIF] Constant Value|this returns the Element Value of this Pay Header [PPH_ID]
| 320400 | Start Date (ppl) |From Pay Line [Start Date|START_DATE] on [P2K_PR_PAY_LINES] |
| 320401 | Time (ppl)  | From Pay Line [Time|TIME_ENTERED] on [P2K_PR_PAY_LINES]|
| 320402 | Time Basis (ppl)  |From Pay Line [Time Basis|TIME_BASIS] on [P2K_PR_PAY_LINES] |
| 320403 | Std Wage (ppl)  | From Pay Line [Std Wage|STD_WAGE_RATE] on [P2K_PR_PAY_LINES]|
| 320404 | Wage Basis (ppl)  |From Pay Line [Wage Basis|STD_WAGE_RATE_BASIS] on [P2K_PR_PAY_LINES] |
| 320405 | Cost Center (ppl)  |From Pay Line [Cost Center|COST_CENTER_CODE] on [P2K_CM_COST_CENTERS] |
| 320406 | Cost Center Desc  | From Pay Line [Cost Center description|DESCRIPTION] on [P2K_CM_COST_CENTERS]|
| 320407 | Work Order (ppl)  | From Pay Line [Work Order|WORK_ORDER] on [P2K_PR_PAY_LINES]|
| 320408 | Reference Info (ppl)  |From Pay Line [Reference Info|REFERENCE_INFO] on [P2K_PR_PAY_LINES] |
| 320409 | Tran Pointer (ppl)  | From Pay Line [Transaction Pointer|TRANSACTION_POINTER] on [P2K_PR_PAY_LINES]|
| 320410 | Pay Line ID (ppl_id)  |From [Pay Line ID|PPL_ID] |
| 320411 | Pay Line Detail (ppld_id)  |From [Pay Line Detail ID|PPLD_ID] |
| 320500 | Wage Rate (ppld)  | From Pay Line Detail [Wage Rate|WAGE_RATE] on [P2K_PR_PAY_LINE_DETAILS]|
| 320501 | Rate Basis (ppld)  | From Pay Line Detail [Rate Basis|RATE_BASIS] on [P2K_PR_PAY_LINE_DETAILS]|
| 320502 | Tran Pointer (ppld)  | From Pay Line Detail [Transaction Pointer|TRANSACTION_POINTER] on [P2K_PR_PAY_LINE_DETAILS]|
| 320600 | Total Value  | |User should specify the Rec# and Field # to be totaled in [IDIF] Constant Value field\\e.g. if Rec # 50 Field # 70 specifies the hours for each employee and need to be totaled for the trailer record, then for trailer record entry, you should specify 'Total Value' with Constant Value = 5070\\  \\This Total Value is available for Header and Trailer records.\\  \\Multiple Rec# and Field # are allowed in the Constant field\\e.g. [[611] + [[612] + [[613] + [[623] - [[624].\\  \\This means calculate the Totals for\\Rec# 61 Fld# 1 + Rec# 61 Fld# 2 + Rec# 61 Fld# 3 + Rec# 62 Fld# 3 - Rec# 62 Fld# 4.\\Any arithmetic operator can be used: +, -, *, /\\  \\Note: The Accum Option and Total Option must be set for the Rec# Fld# that are specified in this Constant field, i.e.Rec# 61 Fld# 1 etc
| 320601 | Detail Record Count|  | Contains the Record Count of each set of Rec# 30-69 in the interface file, i.e. one set of [IDIF] Record Type of 'DetailRecord', can be used as employee count\\e.g. if an employee's one detail record generates three different Record types with Rec# 50, 60, 65, it counts as one because it is for one detail record\\  \\This Record Count is available for Header and Trailer records
| 320602 | All Detail Count | |Contains the Record Count of all Rec# 30-69 in the interface file\\e.g. if an employee's one detail record generates 3 different Record types with Rec# 50, 60, 65, it counts as 3 because there are 3 entries generated on interface file.\\  \\This Record Count is available for Header and Trailer records
| 320603 | User Calc (32) |   |Indicates this Rec#/Fld# will invoke a UserCalc.\\  \\You should enter the UserCalc Name in the Constant Value field \\  \\Please read [User Calc section|
| 320604 | XML Begin Tag (32) |Indicates this Rec#/Fld# is for XML Begin tag |You should enter the XML tag in the XML tag field, if XML tag field is not specified, the Field name is used as XML tag. You should specify XML tag option for this field. If XML tag option is not specified, this XML tag is an optional tag. If you use 320604-XML Begin tag to define the XML tags, you must use 320605-XML End tag to pair with the XML Begin tag. You should use one of the following ways to define XML tags:1) use 320002-XML tag for all Begin and End tags i.e. you specify <Request> and </Request> 2) use 320604-XML Begin tag and 320605-XML End tag . This allows you to use XML tag option to indicate if the XML tag is mandatory or optional. You must not use 320002-XML tag to mix with 320604/320605 definition
| 320605 | XML End Tag (32) |Indicates this Rec#/Fld# is for XML End tag |See 320604- XML Begin tag for detail
| 320606 | UDF (EID) (32) | Indicates this Rec#/Fld# contains a UDF value from [P2K_HR_IDENTITIES] (EID)|You must define the UDF on [IMUF] screen for [P2K_HR_IDENTITIES] and then enter the value on [IEID] screen. On [IDIF] screen, you must enter the [IMUF] UDF name in the Constant Value field. If this Rec#/Fld# is defined with Record Type '92-Update Record', in non-Trial mode, this UDF will be inserted or updated, you do not need to set up UDF on [IMUF] screen
| 320607 | UDF (EEM) (32) | Indicates this Rec#/Fld# contains a UDF value from [P2K_HR_EMPLOYMENTS] (EEM)|You must define the UDF on [IMUF] screen for [P2K_HR_EMPLOYMENTS] and then enter the value on [IEEI] screen. On [IDIF] screen, you must enter the [IMUF] UDF name in the Constant Value field. If this Rec#/Fld# is defined with Record Type '92-Update Record', in non-Trial mode, this UDF will be inserted or updated, you do not need to set up UDF on [IMUF] screen
| 320608 | UDF (EPS) (32) | Indicates this Rec#/Fld# contains a UDF value from [P2K_HR_PERSONALS] (EPS)|You must define the UDF on [IMUF] screen for [P2K_HR_PERSONALS] and then enter the value on [IEPI] screen. On [IDIF] screen, you must enter the [IMUF] UDF name in the Constant Value field. If this Rec#/Fld# is defined with Record Type '92-Update Record', in non-Trial mode, this UDF will be inserted or updated, you do not need to set up UDF on [IMUF] screen
| 320610 | UDF (EASD) (32) | Indicates this Rec#/Fld# contains a UDF value from [P2K_HR_ASSIGNMENT_DETAILS] (EASD)|User must define the UDF on [IMUF] screen for [P2K_HR_ASSIGNMENT_DETAILS] and then enter the value on [IEAS] screen Effective date sections. On [IDIF] screen, you must enter the [IMUF] UDF name in the Constant Value field. If this Rec#/Fld# is defined with Record Type '92-UpdateRecord', in non-Trial mode, this UDF will be inserted or updated, you do not need to set up UDF on [IMUF] screen.
| 320621 | UDF (DED) (32) | Indicates this Rec#/Fld# contains a UDF value from [P2K_CM_ENTITY_DETAILS] (DED)|User must define the UDF on [IMUF] screen for [P2K_CM_ENTITY_DETAILS] and then enter the value on [IDEN] screen Effective date sections. On [IDIF] screen, you must enter the [IMUF] UDF name in the Constant Value field. If this Rec#/Fld# is defined with Record Type '92-Update Record', in non-Trial mode, this UDF will be inserted or updated, you do not need to set up UDF on [IMUF] screen
| 320623 | UDF (DDD) (32) |Indicates this Rec#/Fld# contains a UDF value from [P2K_CM_DEPARTMENT_DETAILS] (EASD)|[P2K_CM_DEPARTMENT_DETAILS] and then enter the value on [IDDP] screen Effective date sections. On [IDIF] screen, you must enter the [IMUF] UDF name in the Constant Value field. If this Rec#/Fld# is defined with Record Type '92-Update Record', in non-Trial mode, this UDF will be inserted or updated, you do not need to set up UDF on [IMUF] screen
| 320624 | UDF (DLN) (32) | Indicates this Rec#/Fld# contains a UDF value from [P2K_CM_LOCATIONS] (DLN)|User must define the UDF on [IMUF] screen for [P2K_CM_LOCATIONS] and then enter the value on [IDLN] screen. On [IDIF] screen, you must enter the [IMUF] UDF name in the Constant Value field. If this Rec#/Fld# is defined with Record Type '92-Update Record', in non-Trial mode, this UDF will be inserted or updated, you do not need to set up UDF on [IMUF] screen
| 320626 | UDF (DUD) (32) | Indicates this Rec#/Fld# contains a UDF value from [P2K_CM_UNIT_DETAILS] (DUD)|User must define the UDF on [IMUF] screen for [P2K_CM_UNIT_DETAILS] and then enter the value on [IDUN] screen Effective date sections. On [IDIF] screen, you must enter the [IMUF] UDF name in the Constant Value field. If this Rec#/Fld# is defined with Record Type '92-Update Record', in non-Trial mode, this UDF will be inserted or updated, you do not need to set up UDF on [IMUF] screen
| 320628 | UDF (DGD) (32) | Indicates this Rec#/Fld# contains a UDF value from [P2K_CM_GROUP_DETAILS] (DGD)|User must define the UDF on [IMUF] screen for [P2K_CM_GROUP_DETAILS] and then enter the value on [IDGR] screen Effective date sections. On [IDIF] screen, you must enter the [IMUF] UDF name in the Constant Value field. If this Rec#/Fld# is defined with Record Type '92-Update Record', in non-Trial mode, this UDF will be Inserted or Updated, you do not need to set up UDF on [IMUF] screen
| 320629 | UDF (PRN) (32) |Indicates this Rec#/Fld# contains a UDF value from [P2K_PR_PAY_RUNS] (PRN) |User must define the UDF on [IMUF] screen for [P2K_PR_PAY_RUNS] and then enter the value on [IPVP] screen. On [IDIF] screen, you must enter the [IMUF] UDF name in the Constant Value field. If this Rec#/Fld# is defined with Record Type '92-Update Record', in non-Trial mode, this UDF will be inserted or updated, you do not need to set up UDF on [IMUF] screen
| 320630 | UDF (PPH) (32) | Indicates this Rec#/Fld# contains a UDF value from [P2K_PR_PAY_LINES] (PPL)|User must define the UDF on [IMUF] screen for [P2K_PR_PAY_LINES] and then enter the value on [IPPH] screen. On [IDIF] screen, you must enter the [IMUF] UDF name in the Constant Value field. If this Rec#/Fld# is defined with Record Type '92-Update Record', in non-Trial mode, this UDF will be inserted or updated, you do not need to set up UDF on [IMUF] screen
| 320631 | UDF (PPL) (32) | |
| 320650 | Statistic Amt (IEST) (65) | Indicates this Rec#/Fld# contains a Statistics value from [P2K_HR_STATISTICS] (EST)|User must define the Statistics Code on [IDSC] screen for [P2K_CM_STATISTIC_COMPONENTS] and then enter the value on [IEST] screen. On [IDIF] screen, you must enter the [IDSC] Statistics Code in the Constant Value field. On [IDIF] screen, you must enter the [IDSC] Statistics Code in the Constant Value field
| 320700 | Journal Entry ID (PJE) (32) | This field holds the [id|PJE_ID] of the current Journal Entry|
| 320701 | Distr Code (PJE) (32) | From [Distribution Code|DISTRIBUTION_CODE] on [P2K_PR_JOURNAL_ENTRIES]|
| 320702 | Journal Source (PJE) (32) | From [Journal Source|JOURNAL_SOURCE] on [P2K_PR_JOURNAL_ENTRIES]|
| 320703 | G/L Post Number (PJE) (32) | From [GL Post Number|GLPOST_NUMBER]on [P2K_PR_JOURNAL_ENTRIES]|
| 320704 | G/L Post Seq (PJE) (32) | From [GL Post Sequence|GLPOST_SEQUENCE] on [P2K_PR_JOURNAL_ENTRIES]|
| 320705 | Trial Journal (PJE) (32) | From [Trial Journal|TRIAL_JOURNAL] on [P2K_PR_JOURNAL_ENTRIES]|
| 320750 | Journal Detail ID (PJD) (32) |This field holds the [id|PJD_ID] of the current Journal Detail |
| 320751 | Pay Line ID (PJD) (32) | This field holds the [PPL_ID] of the current Journal Detail|
| 320752 | Pay Detail ID (PJD) (32) |This field holds the [PPLD_ID] of the current Journal Detail |
| 320753 | Pay Trans ID (PJD) (32) | This field holds the [PTR_ID] of the current Journal Detail|
| 320754 | G/L Fund ID (PJD) (32) | This field holds the [DGF_ID] of the current Journal Detail|
| 320755 | Time Code PTRC_ID (PJD) (32) |This field holds the [PTRC_ID] of the current Journal Detail |
| 320756 | G/L Eff Date (PJD) (32) | From [GL Effective Date|GL_EFFECTIVE_DATE] on [P2K_PR_JOURNAL_DETAILS]|
| 320757 | G/L Amount (PJD) (32) | From [GL Amount|GL_AMOUNT] on [P2K_PR_JOURNAL_DETAILS]|
| 320758 | G/L Amt DR (PJD) (32) | From [GL Amount|GL_AMOUNT] if amount is positive, otherwise 0|
| 320759 | G/L Amt CR (PJD) (32) | From [GL Amount|GL_AMOUNT] if amount is negative,otherwise 0|
| 320760 | G/L Amt-Financial (PJD) (32) | From [GL Amount|GL_AMOUNT] if the DGA [G/L Account Journal Type|JOURNAL_TYPE] for this PJD = '01-Financial', otherwise 0|
| 320761 | G/L Amt-Statistical (PJD) (32) | From [GL Amount|GL_AMOUNT] if the DGA [G/L Account Journal Type|JOURNAL_TYPE] for this PJD = '01-Financial', otherwise 0|
| 320762 | G/L Amt-Time Usage (PJD) (32) | From [GL Amount|GL_AMOUNT] if the [PC Usage Code|PC_USAGE_CODE] for this PJD pay component = '10- Time', otherwise 0|
| 320763 | G/L Amt-Earn Usage (PJD) (32) | From [GL Amount|GL_AMOUNT] if the [PC Usage Code|PC_USAGE_CODE] for this PJD pay component = '11- Earnings', otherwise 0|
| 320764 | G/L Amt-Dedn Usage (PJD) (32) | From [GL Amount|GL_AMOUNT] if the [PC Usage Code|PC_USAGE_CODE] for this PJD pay component = '12- Deduction', otherwise 0|
| 320765 | G/L Amt-Ben Usage (PJD) (32) | From [GL Amount|GL_AMOUNT] if the [PC Usage Code|PC_USAGE_CODE] for this PJD pay component = '13- Benefit', otherwise 0|
| 320780 | Split Percent (PJD) (32) | From [Split Percent|SPLIT_PERCENT] on [P2K_PR_JOURNAL_DETAILS]|
| 320781 | G/L Detail Seq (PJD) (32) |From [GL Detail Sequence|GL_DETAIL_SEQUENCE]  on [P2K_PR_JOURNAL_DETAILS] |
| 320782 | Work Order (PJD) (32) | From [Work Order|WORK_ORDER] on [P2K_PR_JOURNAL_DETAILS]|
| 320783 | G/L Pointer (PJD) (32) |From [GL Pointer|GL_POINTER]  on [P2K_PR_JOURNAL_DETAILS] |
| 320800 | G/L Account ID (DGA) (32) |This field holds the [id|DGA_ID] of the G/L Account of current journal entry |
| 320801 | G/L Account Code (DGA) (32) | From [GL Account Code|GL_ACCOUNT_CODE] on [P2K_CM_GL_ACCOUNTS] of current G/L Account|
| 320802 | 0802 Account Type (DGA) (32) | From [GL Account Type|ACCOUNT_TYPE] on [P2K_CM_GL_ACCOUNTS] of current G/L Account|
| 320803 | Journal Type (DGA) (32) | From [Journal Type|JOURNAL_TYPE] on [P2K_CM_GL_ACCOUNTS]|
| 320804 | 0804 Account Usage (DGA) (32) |From [Account Usage|ACCOUNT_USAGE] on [P2K_CM_GL_ACCOUNTS] |
| 320805 | 0805 Account Desc (DGA) (32) | From [Account Desc|DESCRIPTION] on [P2K_CM_GL_ACCOUNTS]|
| 320806 | Distr Mask (DGA) (32) | From [Distribution Mask|DISTRIBUTION_MASK] on [P2K_CM_GL_ACCOUNTS]|
| 320807 | Affects Costing (DGA) (32) |From [Affects Costing|AFFECTS_COSTING] on [P2K_CM_GL_ACCOUNTS] |
| 320808 | Pre Payroll (DGA) (32) | From [Pre Payroll|PRE_PAYROLL] on [P2K_CM_GL_ACCOUNTS]|
| 320809 | Post Payroll (DGA) (32) |From [Post Payroll|POST_PAYROLL] on [P2K_CM_GL_ACCOUNTS] |
| 320810 | Retain Detail (DGA) (32) |From [Retain Detail|RETAIN_DETAIL] on [P2K_CM_GL_ACCOUNTS] |
| 320811 | Accrued Required (DGA) (32) |From [Accrued Required|ACCRUAL_REQUIRED] on [P2K_CM_GL_ACCOUNTS] |
| 320812 | I/C Required (DGA) (32) | From [I/C Required|INTERCOMPANY_REQUIRED] on [P2K_CM_GL_ACCOUNTS]|
| 320813 | Posting Date Method (DGA (32) |From [Posting Date Method|POSTING_DATE_METHOD] on [P2K_CM_GL_ACCOUNTS] |
| 320814 | G/L Acct Suffix (DGA) (32) | From [GL Acct Suffix|GL_ACCOUNT_SUFX]on [P2K_CM_GL_ACCOUNTS]|
| 320815 | Acct Charge To (DGA) (32) | From [Acct Charge To|ACCOUNT_CHARGE_TO] on [P2K_CM_GL_ACCOUNTS]|
| 320900 | Pay Component ID (PPC) (32) |This field holds the [id|PPC_ID] of the Pay Component of current journal detail |
| 320901 | PC Code (PPC) (32) | From [PC Code|PC_CODE] on [P2K_PR_PAY_COMPONENTS]|
| 320902 | PC Abbrev (PPC) (32) |From [PC Abbreviation|PC_ABBREVIATION] on [P2K_PR_PAY_COMPONENTS] |
| 320903 | PC Desc (PPC) (32) | From [PC Description|DESCRIPTION] on [P2K_PR_PAY_COMPONENTS]|
| 320904 | PC Action (PPC) (32) |From [PC Action|PC_ACTION] on [P2K_PR_PAY_COMPONENTS] |
| 320905 | Store Results (PPC) (32) |From [Store Results|STORE_RESULTS] on [P2K_PR_PAY_COMPONENTS] |
| 320920 | PC Usage ID (PCU) (32) | This field holds the [id|PCU_ID] of the Pay Component Usage of the pay component of the current journal detail|
| 320921 | PC Usage Code (PCU) (32) | From [PC Usage Code|PC_USAGE_CODE] on [P2K_PR_PC_USAGES]|
| 320922 | PC Usage Type (PCU) (32) | From [PC Usage Type|PC_USAGE_TYPE] on [P2K_PR_PC_USAGES]|
| 320923 | PC Usage Desc (PCU) (32) | From [PC Usage Description|DESCRIPTION] on [P2K_PR_PC_USAGES]|
| 320924 | Unique Item (PCU) (32) | From [Unique Item|UNIQUE_ITEM] on [P2K_PR_PC_USAGES]|
| 320925 | Mandatory (PCU) (32) | From [Mandatory|MANDATORY] on [P2K_PR_PC_USAGES]|
| 320926 | Legislation (PCU) (32) |From [Legislation|LEGISLATION] on [P2K_PR_PC_USAGES] |
| 320927 | PC G/L Type (PCU) (32) |From [PC GL Type|PC_GL_TYPE] on [P2K_PR_PC_USAGES] |
| 321000 | Pays Per Year (PPP) (32) | |

!!Setup Step 2 - Define Interface Format in [IDIF]

!Fixed File Format
The system provides SEED_IDIF_HL$_UPPHF_ADMIN.sql script to load in [HL$UPPHF-ADMIN] as an example of a fixed format interface file. You should use (Copy Definition) to copy the script into a different Interface code and then enter their own company data.

IDIF field descriptions:

Code:				- user defined Interface Code
- if IDIF layout is supplied by the system, the Interface Code begins with HL$
Interface Type:			- must be 32 - Pay History Interface
File Format:			- specifies one of the File Formats from look up list
Form Type:			- please select 'Not Specified' from look up list, Form Type is not used for UPPHF
Description:			- user defined description
File Name:			- specifies the default file name, otherwise file name is entered on UPPHF parameter
File Creation Number:		- not used
Taxation Level:			- please select 'Not Specified' from look up list, Taxation Level is not used for UPPHF

Record Number			- user assigned Record Number
				- each Record Number generates a new line in the interface file

	The followings are suggested Record Numbers, user can set up their own numbers.

	Record Number			Interface File Records generated
		0			Qualify Records
	          1 - 29			Header Records
	        30 - 69			Detail Records
	        70 - 99			Trailer Records or Update Records

Field Number			- user assigned number
Name				- user assigned field name
XML Tag			- optional, used for XML File Format only
- if XML Tag is not specified for XML File, then the Name field is used as XML Tag

Beginning Position		- if File Format = 'Fixed Format', the user must specify the Beginning position
Ending Position			- if File Format = 'Fixed Format', the user must specify the Ending position
- these positions must be continuous without gap, otherwise an error situation will occur
				- Beginning/Ending positions are not needed for xml and other file format

Field Type			- indicate the result of the Field Variable is a type of 'Char', 'Number' or 'Date'

Variable Name			- select from lexicon X_INF_VARIABLE_NAME 32nnnn, refer to lexicon list above

Sort Sequence			- specifies the Sort Sequence for this Record #, Field #
				- use for Record # with Record Type = ‘Detail Record’ only
	- for Record # with Record Type = ‘Detail Level 1’ to ‘Detail Level 5’, it uses the same Sort from Record Type = ‘Detail Record’ so that the Detail Level n records are followed after the ‘Detail Record’
				e.g. Interface File need to sort by: Department, Employee First Name, Last Name
					- then for the Fld# entry that specify ‘Department’, enter sort sequence: 100
					- for the Fld# that specify ‘Employee First Name’, enter sort sequence: 150
					- for the Fld# that specify ‘Employee Last Name’, enter sort sequence: 200
				- all Sort sequences must be entered on entries with the same Record Number

	- Sort Sequence is not supported for XML file format because xml file may specify many different Record # to generate xml begin and end tags and the xml tags are not able to sort along with the data

	- Sort Sequence is not supported if the IDIF format contains ‘Pay Header Begin’ or ‘Pay Header Summary’ because the Sorting of the Detail Record cannot carry it’s associated Header/Summary Record

Format Mask			- applicable to Numeric and Date field

Record Type			- optional, may be used for this Interface Type

				- if Record Type is not specified, the following Record Number range are used:
	Record Number			Interface File Records generated
		0			Qualify Records
	          1 – 29			Header Records
	        30 – 69			Detail Records
	        70 – 99			Trailer Records

				- if Record Type is specified, lexicon X_RECORD_TYPE values are:
					00 – Not Specified		- not applicable for this Interface type
					01 – Header Record		- generate Header records at begin of file
					10 – Employer Header		- not used for UPPHF
					11 – Employer Summary		- not used for UPPHF
					12 – Employer Header 2		- not used for UPPHF
					13 – Employer Summary 2		- not used for UPPHF
					14 – Employee Header		- not used for UPPHF
					15 – Employee Summary		- not used for UPPHF
16 – Pay Header Begin	- generate records at beginning of each Pay Header 
17 – Pay Header Summary	- generate records at the end of each Pay Header 
					20 – Detail Record		- generate Pay Header interface records
					21 – Detail Level 1		- Detail Level 1 is used for Journal Entries
					22 – Detail Level 2		- not used for UPPHF
					23 – Detail Level 3		- not used for UPPHF
					24 – Detail Level 4		- not used for UPPHF
					25 – Detail Level 5		- not used for UPPHF
					30 – Detail Summary		- not used for UPPHF
					80 – Total Record		- not used for UPPHF
					90 – Trailer Record		- generate Trailer records at end of file
									- may contain File totals, record counts etc
					91 – Qualify Record		- should be used for Record Number 0
	- the Qualify records are performed at the beginning of every Pay Header to qualify the Pay Header
	- user can use derivation expression to BYPASS certain criteria
92 – Update Record	- should be defined at the end of the IDIF definition
	- in non-Trial mode, the UDF can be Inserted or Updated as defined in the Variable Name and Constant Value field
	- user can use derivation expression to BYPASS certain criteria for Update

Record Identifier		- not used for this Interface Type

Constant Value			- if Variable Name = ‘Constant Value’, this field specifies the Constant Value to be used
				- if Variable Name = ‘User Calc’, this field specifies the User Calc Name
				- if Variable Name = ‘UDF (xxx)’, this field specifies the User Defined Field Name
				- if Variable Name = ‘Statistics Amt’, this field specifies the Statistics Code
				- if Variable Name = ‘Element’, this field specifies the Element Code
	- if Variable Name = ‘Total Value’, this field specifies the Rec# and Field # of the Detail Records to be totaled
	e.g. Record # 50 Field 70 is to be totaled and Total option = ‘Calculate Total’, then the Trailer record can report the ‘Total Value’, Constant value should be 5070

Print Zero Rule			- applicable to Numeric field only, use for Record Type = ‘Detail Record’
	- if amount is zero, this field indicates to include this amount in the interface file or not
- e.g. if the field is from ‘Element Amount’ and the amount is zero, the user may not want to report this amount

	- if all numeric amounts are zero within one Record# and the Print Zero Rule are set to ‘Do not Print zeros’ for each field, then this entry will not be reported on interface file
					- lexicon X_PRINT_ZERO_RULE
						00 – Not Specified
						01 – Print Zero Amounts
						02 – Don’t Print Zeros

XML Tag option	- applicable to XML file, if Variable Name = ‘XML begin Tag’or ‘XML end Tag’, this field option indicates if the XML Tag should be written
					- lexicon X_XML_TAG_OPTION
						00 – Not Specified
						01 – Optional, omit tag if null
						02 – Mandatory, always write

Accum Option			- applicable to Numeric field only, use for Record Type = ‘Detail Record’
				- indicate if this Record #, Field # amount should be accumulated or not
- e.g. if the field is a ‘Pay Number’ or ‘Check Number’, then do not accumulate
- if field is ‘Element Value’ or ‘PC Amount’, then you may want to accumulate to avoid writing too much detail per element or per pay component

Total Option			- applicable to Numeric field only, use for Record Type = Detail Record, Detail Leveln
- indicate if this Record #, Field # amount should be totaled for Header or Trailer record
- e.g. if the field is a ‘FTE’ or ‘Rate of Pay’, then do not totaled
- if field is ‘Statistics Amount’ or ‘User Calc Amount’, then you may want to calculate the total for Trailer record
					- lexicon X_TOTAL_OPTION
						00 – Not Specified
						01 – Calculate Total

Derivation Expression		- specifies the derivation expression for the Variable name
	- this derivation expression will apply to the result of the Variable name before format mask

	- the user may use RTRIM(~) to remove trailing blanks before comparing the entire string because the data may contain blanks that are not visible at the end

				- please refer to following Derivation Expression processing

!BYPASS capability

- on IDIF Derivation expression, user may decode the Variable Name using the ~ character and return the word ‘BYPASS’ to bypass the Detail record entry that are with certain criteria

- the ‘BYPASS’ criteria can be set up for Record Type = ‘Qualify record’, ‘Detail record’, and should not be used for Header and Trailer records

- if the return value of any IDIF Record Number/Field Number = ‘BYPASS’, then this Detail record will be bypassed and will not be written to the Interface file

- Example:

	- to include only Departments start with ‘P’ on interface file:
decode(rtrim(substr(~,1,1)),'P',~,'BYPASS')

	- to include only Departments ends with ‘C’ on interface file:
decode(substr(~,length(rtrim(~)),1),'C','BYPASS',~)

	- to bypass Cost Centers that has ‘????’ in second segments:
	decode(SUBSTR(~,5,4),'????','BYPASS',SUBSTR(~,5,4))

	- to include Journal Entries with Account Numbers over 40000 in segment 5:
	decode(greatest('40000',substr(~,16,5)),'40000','BYPASS',substr(~,16,5))

!BYPASS-1-PPL, BYPASS-ALL-PPL, BYPASS-TO-PPH

- when UPPHF is run with Interface Level = ‘Pay Headers + Pay Lines’, user may want to BYPASS the current Pay Line and continue to process the next Pay Line

- when a Pay Line (ppl) is being processed, all the associated Pay Line Details (ppld) are processed one at a time until all ppld are finished

- the following BYPASS capabilities are available at the Pay Line level:

	BYPASS		- bypass current ppld, will go to process next ppld
	- usually BYPASS should be used for Qualify Records and is also used for other Record Types, this BYPASS also works in ppl

	BYPASS-1-PPL		- bypass current ppld, will go to process next ppld
	- when Interface Level = ‘Pay Headers + Pay Lines’, user should use ‘BYPASS-1-PPL’ instead of just ‘BYPASS’ for clarification

	BYPASS-ALL-PPL	- bypass all ppl and ppld from this point onward, will go to process Pay Amounts
				- the Pay Amounts will subtract the amounts that have been processed by ppld so far

	BYPASS-TO-PPL	- bypass all ppl, ppld, Pay Amounts from this point onward
- will go to process Pay Header Summary

Example:

 
 

In Derivation Expression:

decode(~,'14-OCT-2008','BYPASS','16-OCT-2008','GOTO#60#1','22-OCT-2008','BYPASS-1-PPL','24-OCT-2008','BYPASS-ALL-PPL',~)

- this means DECODE the Pay Line Start Date, if the Pay Line Start Date:

1)	equals to ‘14-OCT-2008’, then return the value of ‘BYPASS’
2)	equals to ‘16-OCT-2008’, then return the value of 'GOTO#60#1'	- this will GOTO Rec# 60 Field # 1
3)	equals to ‘22-OCT-2008’, then return the value of ‘BYPASS-1-PPL’
4)	equals to ‘24-OCT-2008’, then return the value of ‘BYPASS-ALL-PPL’

 

!GOTO#nn#nnn


- when processing IDIF records of the same Record Type (e.g. Detail Record), the user may want to skip some Record # Field # based on certain criteria and resume processing of the same Record Type at a later Record# Field# onward

- the following GOTO capabilities are available for all Record Types in Derivation Expression:

	GOTO#nn#nnn		- where the 1st nn is the Record #, the 2nd nnn is the Field #

- since the IDIF entries are processed in chronological order, GOTO#nn#nnn must be for a Record# Field# that is after the current Record# Field#

- if an incorrect GOTO#nn#nnn is specified, or the #nn#nnn is NOT for the same Record Type, or if it is for a previous Rec# Field#, an exception message will be issued, the GOTO statement cannot be executed after skipping the records, the user must verify the Interface File from this point onward

- multiple GOTO#nn#nnn can be used within the same Record Type

- please see the above example for BYPASS-1-PPL that contains GOTO#60#1 to go to Record# 60 Field# 1

- if an Invalid GOTO is encountered in IDIF definition, the Trial mode parameter is set to ‘Y’ in order to prevent the Updating of the User Defined Fields from the Record Type ’92-Update Record’

- for XML File Format, the GOTO#nn#nnn can be used to skip certain XML Tags and carry on the processing

- for Fixed File Format, if the GOTO#nn#nnn is for the current Record#, it will GOTO the specified #nn#nnn, the current Record# information will be written

- for Fixed File Format, if the GOTO#nn#nnn is for a different Record#, it will GOTO the specified #nn#nnn of the different Record#, the current Record# information will NOT be written

 

- e.g. UEEF IDIF Record# 30 Field # 45, decode Plan_Code, if it equals to ‘HL GROUP LIFE’, GOTO#35#10
	- this will skip the entire Record# 30 and carry on from Record# 35 Field#10 for the fixed file format

 
!Multiple Fields processing

- on IDIF derivation expression, user can specify multiple variable names processing by indicating the lexicon value of the  X_INF_VARIABLE_NAME inside the bracket [ ], e.g. [320001]

- lexicon values available from IMLN for X_INF_VARIABLE_NAME are: 32nnnn, 35nnnn

- this provides the full list of INF variables interchangeably for UPPHF, UEEF as long as the Database tables are being loaded according to the Interface Level parameter of the run

- please see example below


 

Example: Record # 50, Field # 20 Requirement for Employee Row id or Unit id:

- if Pay Header Group User Defined Field (UDF) ‘PROJECT HOURS BY PERSON’ is ‘Y’, this means the employee is an ‘ADMIN’ employee, then if the Journal Entry is reporting for ‘Hours’, then use the Identities eid.id on the interface file field, otherwise, use the Unit dun.id on the field for all other situation

- from above IDIF set up, user should specify the Variable Name using ‘UDF (DGD)’ and enter the UDF name in Constant Value field, then the value of UDF will be returned and represented as ~ in the derivation expression

- in derivation expression, enter:

	decode(~,'Y',decode([320803],'02',[320009],[350400]),[350400])

	where:
	[320803]	- Journal Type (DGA), 01 – Financial Journal, 02 – Statistical Journal
	[320009]	- Identity eid_id
	[350400]	- Unit dun_id (DUN)

- this derivation expression means:

	- decode the value of ~ from UDF
		- if the value = ‘Y’, then
			- decode the value from [320803] Journal Type
		- if Journal Type = ‘02’ Statistical Journal, then 
					- return [320009] Identify eid.id
				- otherwise
					- return [350400] Unit dun_id
		- otherwise
			- return [350400] Unit dun_id


Example: Record # 50, Field # 10 Requirement: Work Date or Pay Period

- if Pay Header Group User Defined Field (UDF) ‘PROJECT HOURS BY PERSON’ is ‘Y’, this means the employee is an ‘ADMIN’ employee, then use the Pay Period on the interface file field, otherwise use the GL Effective date on the interface file field

- from above IDIF set up, user should specify the Variable Name using ‘UDF (DGD)’ and enter the UDF name in Constant Value field, then the value of UDF will be returned and represented as ~ in the derivation expression

- in derivation expression, enter:

	decode(~,'Y',[320102],to_char(to_date([320756]),'DD/MM/YYYY'))
	where:
	[320102]	- Pay Period
	[320756]	- GL Eff Date (PJD)

- this derivation expression means:

	- decode the value of ~ from UDF
		- if the value = ‘Y’, then
			- return the value from [320102] Pay Period
		- otherwise
			- return the value from [320756] GL Effective date with the date format of ‘DD/MM/YYYY’

!P2K Internal Functions

The user has ability to call some P2K internal functions in the derivation expression under the guidance of HL consultant.  The following example is for UPPHF Payroll History Interface, and is used to demonstrate Derivation Expression only.  In this example, the Element value of ‘HOURS COMP TIME’ will be returned for Variable Name ‘Pay Header pph_id’.

Note: the IDIF screen layout is revised as above, the screen prints in this section are example of Derivation Expression only and therefore are not matched with revised layout above, please ignore the layout format


 


The above example can also be achieved by setting up Variable Name = ‘Element pph Value’ with the Element Code specified in the Constant Value field.

 





!P2K Internal Functions with Parameters


The user has ability to call some P2K internal functions in the derivation expression under the guidance of HL consultant and pass the following internal parameters in order to perform some internal calculation:

	#PPH_ID#	- must be capital letters, this #PPH_ID# will be replaced by the current Pay Header’s pph.id
	#EEM_ID#	- must be capital letters, this #EEM_ID# will be replaced by the current Employment’s eem.id
	#EID_ID#	- must be capital letters, this #EID_ID# will be replaced by the current Identity’s eid.id

e.g..  the Element PC value of ‘HOURS O/T’ will be retrieved first and is represented as ~ in derivation expression
- the derivation expression will return the Element value of ‘HOURS COMP TIME’ for #PPH_ID# and add to value of ~ 

 


User may perform some internal arithmetic calculation in the derivation expression to return some prorated amount.

	Value of a PC in ‘HOURS O/T’ element	*    Benefit Element ‘HOURS COMP TIME’
Value of ‘HOURS O/T’ Element

 


!XML File format

- the system provides starter_IDIF_HL$PAY-HIST-XML.sql script to load in example of a xml format interface file
- the user should use [Copy Definition] to copy into a different Interface Code and then enter their own company data
- please refer to IDIF Fixed File Format for details of field description
- the Beginning and Ending positions are not needed for xml file format


!!IDIF – Call User Calc
!Call User Calc function
 

- the user can call User Calc function at each Record Number, each Field Number
- the user should set up Variable Name = ‘User Calc’, and specify the User Calc name in the Constant Value field
- the Field Type must be defined with Char, Number or Date, the User Calc function on IMUC screen Return Value must match the values (Char, Number or Date) with the IMUC RET command to return the corresponding Char, Number or Date 

- the data base tables available for User Calc are: 
at company level: 	DEN/DLN/DDP/DDD/DUN/DGR/DGD/DGV
at employee level: 	EID/EPS/EEM/EAS/EASD/PPRU/PPRC

!!IDIF - Update Record Set Up
During the UPPHF run, you have the ability to update certain User Defined Fields (UDF) to indicate that the Interface file has been generated and mark the records as being processed.

You may reference these UDFs in [IDIF] to prevent the same information from being processed again.

On the [IDIF] screen, Record Type '92-Update Record' should be defined at the end of the [IDIF] definition 
* the Variable Name should contain the UDF (xxx) that is to be updated or inserted,e.g. '320629 - UDF (PRN) (32)'

The Constant Value field should contain the name of the UDF, e.g UPPHF_CALPERS_PRN. If this UDF name does not exist on the [IMUF] screen, UPPHF will create the UDF with this name on [IMUF] screen for the Data Base Table to be updated.

The Derivation Expression field should contain the expression that is evaluated to the value to be updated for the UDF

The following derivation expression features can be used to derive the value to be updated:
* multiple fields processing, DECODE, BYPASS, string manipulation, concatenation, function calls, etc.

When UPPHF is run in non-Trial mode, Record Type '92-Update Record' will be processed at the appropriate levels to check if the UDF should be updated for the associated Data Base tables.

From above example:
*Rec#500 Field#10 indicates to update 'UDF (PRN)', this will be processed at the end of each qualified pay run
*Rec#500 Field#20 indicates to update 'UDF (PPH)', this will be processed at the end of each qualified pay header
*Rec#500 Field#30 indicates to update 'UDF (PPL)', this will be processed at the end of each qualified pay line
*Rec#500 Field#40 indicates to update 'UDF (EEM)', this will be processed at the end of each qualified pay header
*Rec#500 Field#50 indicates to update 'UDF (EASD)', this will be processed at the end of each qualified pay line

If the UDF is for a variable name that can be varied at the Pay Line level, then the UDF will be updated at each Pay Line level, e.g. 'UDF (DDD)', each pay line may point to a different department, therefore the UDF may be updated at the Pay Line level for that department

Using the Returned Value of the derivation expression, UPPHF finds if the UDF already exists; if the UDF exists and the new value is different than the existed UDF value, it will be updated;  if the UDF does not exist, it will be inserted

List of UDF supported in UPPHF from [X_INF_VARIABLE_NAME] are:
*320606 - UDF (EID) (32)
*320607 - UDF (EEM) (32)
*320608 - UDF (EPS) (32)
*320610 - UDF (EASD) (32)
*320621 - UDF (DED) (32)
*320623 - UDF (DDD) (32)
*320624 - UDF (DLN) (32)
*320626 - UDF (DUD) (32)
*320628 - UDF (DGD) (32)
*320629 - UDF (PRN) (32)
*320630 - UDF (PPH) (32)
*320631 - UDF (PPL) (32)

After UDFs are updated or inserted in UPPHF, the number of records updated for each Data Base table will be displayed on the UPPHF  report

%%information The number of UDFs updated represents the number of times the tables are being touched. These may not necessarily be the exact number of UDF for that table. e.g. UDF (EEM) may be touched two times if an employee has two pay headers to update the same EEM, but with a different value.%%

!!IDIF – Update Record

!IDIF – Update Record Set Up
- During the UPPHF run, user has ability to Update certain User Defined Fields (UDF) to indicate the Interface File has been generated and mark the records as being processed.  User may reference these UDFs in IDIF to prevent the same information from being processed again.

- on IDIF screen, Record Type ’92-Update Record’ should be defined at the end of the IDIF definition

- the Variable Name should contain the UDF (xxx) that is to be Updated or Inserted, e.g. ‘320629 – UDF (PRN) (32)’

- the Constant Value field should contain the Name of the UDF, e.g UPPHF_CALPERS_PRN
- if this UDF name does not exist on the IMUF screen, UPPHF will create the UDF with this name on IMUF screen for the Data Base Table to be updated

- the Derivation Expression field should contain the Expression that is evaluated to the Value to be updated for the UDF
- the following Derivation Expression features can be used to derive the Value to be updated:
- multiple fields processing, DECODE, BYPASS, String manipulation, concatenation, function calls etc

- when UPPHF is run in non-Trial mode, Record Type ’92-Update Record’ will be processed at the appropriate levels to check if the UDF should be updated for the associated Data Base Tables


From above Example:

- Rec#500 Field#10 indicates to update ‘UDF (PRN)’, this will be processed at the end of each qualified Pay Run
- Rec#500 Field#20 indicates to update ‘UDF (PPH)’, this will be processed at the end of each qualified Pay Header
- Rec#500 Field#30 indicates to update ‘UDF (PPL)’, this will be processed at the end of each qualified Pay Line
- Rec#500 Field#40 indicates to update ‘UDF (EEM)’, this will be processed at the end of each qualified Pay Header
- Rec#500 Field#50 indicates to update ‘UDF (EASD)’, this will be processed at the end of each qualified Pay Line

- if the UDF is for a Variable Name that can be varied at the Pay Line level, then the UDF will be updated at each Pay Line level, e.g. ‘UDF (DDD)’, each Pay Line may point to a different Department, therefore the UDF may be updated at the Pay Line level for that Department

- using the Returned Value of the Derivation Expression, UPPHF finds if the UDF already exists; if the UDF exists and the new value is different than the existed UDF value, it will be Updated; if the UDF does not exist, it will be Inserted

- list of UDF supported in UPPHF from X_INF_VARIABLE_NAME are:
	320606 – UDF (EID) (32)
	320607 – UDF (EEM) (32)
	320608 – UDF (EPS) (32)
	320610 – UDF (EASD) (32)
	320621 – UDF (DED) (32)
	320623 – UDF (DDD) (32)
	320624 – UDF (DLN) (32)
	320626 – UDF (DUD) (32)
	320628 – UDF (DGD) (32)
	320629 – UDF (PRN) (32)
	320630 – UDF (PPH) (32)
	320631 – UDF (PPL) (32)

- after UDFs are Updated or Inserted in UPPHF, the Number of Records Updated for each Data Base Table will be displayed on the UPPHF report

- note that these Number of UDF Updated represents the number of times the Tables are being touched, these may not necessarily be the exact or unique number of UDF for that Table, e.g. UDF (EEM) may be touched 2 times if an employee has 2 Pay Headers to update the same EEM but with a different Value




----
!!Processing Information
!Qualify Process
From the selection criteria, UPPHF selects pay runs according to user specified From/To Pay Period, Entity, and Payroll.

A pay run's Pay Period End date or Pay Issue date must be on the day of or prior to the user specified ‘As of’ date.

Pay runs with a Pay Run Stage of '70 - Closed' or '80 - Journalized' will be processed.

All pay headers of the qualified pay runs will be processed, pay headers may further be selected by Department, Org Level, Unit, Group, Person code etc.

As each pay header is processed, the associated database tables for this pay header will be loaded.
;:''e.g. Entity, Payroll, Unit, Group, Employment, Assignment of Pay Header, Department of Assignment, Position/Job of Assignment, Authorization Area of the applicable assignments, Organization Level of the department, Pay Period, Tax Jurisdiction, etc.''

The pay header is then further qualified by using the [IDIF] record type, 'Qualify Record'. If the 'Qualify Record' returns the value of 'BYPASS', then this pay header will be bypassed. 

After the pay header is qualified, then the UPPHF Interface Level parameter is checked.

!Interface Level 01 - Pay Headers
For the interface level of ' 01 - Pay Headers', the pay header and its associated pay amounts will be processed.

Each pay header's information will be loaded.
;:''e.g.the pay header assignment, assignment's department, cost centers, position, job, authorization, organization level of department, etc.''

If the [IDIF] numeric field specifies that an [element|PAY ELEMENTS] (pph value) is to be used, then the [Element code|ELEMENT_CODE] should be specified in the [IDIF] Constant Value field. UPPHF calls the Element function for this [element|PAY ELEMENTS] to obtain the element amount.

If the [IDIF] numeric field specifies to 'Accumulate' and/or to 'Calculate Total', then the amount will be accumulated or totaled.

If the [IDIF] field specifies a sort sequence, then the Variable Name value is also used for sorting purpose. The [IDIF] Record Type 'Detail Record' (or Rec#30 - 69) information for this pay header will then be saved in an internal PL/SQL table.

With all the pay header information, UPPHF searches from the internal PL/SQL table to group the same information together.

If the Interface File layout specifies any field that is to be reported at the employee level, e.g. Employee Name, Pay Number etc, then UPPHF will write the internal PL/SQL table to Execution Run Log table with Trace Level = '7' with the Sort Data in the context 2 field.

If the Interface File layout does not specify any field that is to be reported at the employee level, then the internal PL/SQL internal table will be used for all employees. At the end of UPPHF run, it will write the internal PL/SQL table to Execution Run Log table with Trace Level = '7' with the Sort Data in the context 2 field. Then the Execution Run Log with Trace Level '7' will be re-read and sorted by context 2 field to write to the interface file.

If the sort sequence is not used in [IDIF] record type 'Detail Record' (or Rec# 30-69), then UPPHF will not write to Execution Run Log, it will directly read from the PL/SQL table and write to interface file.

After UPPHF is run, you should verify from the interface directory the Interface File layout

!Interface Level 02 - Pay Headers + Pay Lines
For interface level '02 - Pay Headers + Pay Lines', all pay lines of this pay header will be processed.

Each pay line's information will be loaded.
;:''e.g. Pay line assignment, department, cost centers, position, job, authorization, organization level of department, etc. This may be different than the pay header's assignment, department, etc.''

As each pay line is processed, all of its associated pay line details will be processed. 

As each pay line detail is processed, the [pay component|PAY COMPONENTS] and amount of this pay line detail is retrieved.

With one [pay component|PAY COMPONENTS] and amount from one pay line detail, UPPHF will process [IDIF] record type 'Detail Record' (or Record # 30 - 69 if the record type does not exist).

The [IDIF] record type 'Detail Record' (or Record# 30 - 69) Variable Names can reference to the loaded pay line detail or pay header information. e.g. Pay Period, Department, Cost Centers,etc.

If the [IDIF] numeric field specifies to retrieve a [pay component|PAY COMPONENTS] value, then the pay line detail amount will be used.

If the [IDIF] numeric field specifies to use an [element|PAY ELEMENTS], then the [Element code|ELEMENT_CODE] is specified in the constant value and UPPHF checks if the Pay Line Detail [pay component|PAY COMPONENTS] is in this [element|PAY ELEMENTS] to include the pay line detail amount or not.

If the [IDIF] numeric field specifies to 'Accumulate' and/or to 'Calculate Total', then this Pay Line Detail amount will be accumulated or totaled.

If the [IDIF] field specifies a sort sequence, then the variable name result is also used for sorting purpose.

Then the [IDIF] record type 'Detail Record' (or Rec#30 - 69) information for this pay line detail will be saved in an internal PL/SQL table.

As the next pay line detail record is processed, UPPHF will search from the internal PL/SQL table to group the same information together.

After all pay line details and pay lines are processed for one pay header, then the pay amounts of this pay header will be processed.

As each pay amount is processed, it will subtract the amount that has been processed by the pay line details and then process the remaining amount with [IDIF] the record type 'Detail Record' (or Record # 30-69).

With the pay amount information, UPPHF searches from the internal PL/SQL table to group the same information together.

After all pay amounts are processed for one pay header, UPPHF will process the internal PL/SQL table and write to the interface file.

If the Interface File layout specifies any field that is to be reported at the employee level (e.g. Employee Name, Pay Number, etc.) then UPPHF will write the internal PL/SQL table to Execution Run Log table with Trace Level = '7' with the Sort Data in the context 2 field.

If the Interface File layout does not specify the field that is to be reported at the employee level, then the internal PL/SQL internal table will be used for all employees. At the end of UPPHF run, it will write the internal PL/SQL table to Execution Run Log table with Trace Level = '7' with the Sort Data in the context 2 field.

Then the execution run log with Trace Level '7' will be re-read and sorted by the context 2 field to write to the interface file.

If the sort sequence is not used in the [IDIF] record type 'Detail Record' (or Rec# 30-69), then UPPHF will not write to execution run log, it will directly read from PL/SQL table and write to interface file.

After UPPHF is run, you should verify the Interface File layout from the interface directory.

!Interface Level 10 - Journal Entries
For the Interface Level '10 - Journal Entries', UPPHF will first process the [IDIF] record type 'Detail Record' for the pay header and then process [IDIF] record type 'Detail Level 1' for all the pay header's related journal entries.

__Record Type__: Interface File Record

__Detail Record__: This is an optional field and may generate a Header record for the pay header.

__Detail Level 1__: This is a mandatory field and will generate one entry per Journal Detail record. In this way you may generate interface records in following sequence:
;:''Pay header employee related info
;:''Journal Detail
;:''Journal Detail
;:''Journal Details

;:''Pay header employee related info
;:''Journal Detail
;:''Journal Detail
;:''Journal Detail
;:''Journal Detail
;:.'' etc''

As each journal detail is processed, UPPHF saves the [IDIF] information using the internal PL/ SQL table in the same manner as the '01 - Pay Headers' processing. After all journal entries are processed for one pay header, UPPHF will then process the internal PL/SQL table and write to the interface file.

!Pay Header Summary
After the interface level is processed for these levels and before writing to the Interface File, UPPHF will process [IDIF] Record Type '17-Pay Header Summary' to generate pay header related summary information for this pay header.

!Update Record
When UPPHF is run in non-trial mode, Record Type '92-Update Record' will be processed at the appropriate levels to check if the User Defined Fields (UDF) are to be updated for the associated Data Base tables.

!!Report Parameter
----
!Report Parameters & Filters
||Report Parameters||
|From Pay Period |This is an optional field. You may select a From Pay period for the Payroll code specified.
|To Pay Period |This is an optional field. You may select a To Pay period for the Payroll code specified.
|From Pay Issue Date| This is an optional field. You may select a From Pay Issue date for the pay headers.
|To Pay Issue Date |This is an optional field. You may select a To Pay Issue date for the pay headers. If the From-To Pay Issue dates are entered, each pay header's Pay Issue date must be within this date range in order to be processed.
|As Of| This date is used to retrieve pay runs that are with the Pay Period end date or Pay Issue Date that is on or prior to this As Of date.
|Interface Format Code| Select Interface Format Code that is with the Interface Type of '32-Pay History Interface'
|Interface Level| This is a mandatory field. Specify the level of Interface file to be produced.
|Directory Name| Enter a valid directory name for interface file.
|File Name |Enter the file name of the interface file. If the word 'mex' is specified in the file name, then it will be replaced with the current execution id of UPPHF run. For a fixed format file, you may specify a file with extension .txt. For a comma delimited format file, you may specify a file with extension .csv For the XML file, you may specify a file with extension .XML
|Exception Level| If the exception level is '0', only exception messages will be printed. If the exception level is '1', one line will be printed per pay header with performance time. If the exception level is '2', one line will be printed per pay header with performance time and one line per Detail Level 1 record. If the exception level is '8' or '9', full utility trace is available only if the user selects by Person code. Otherwise UPPHF will internally reset to exception level '1' due to the volume of trace messages.


||Report Filters||
|Entity |This is a mandatory field. You must enter one 'Entity Code' to be processed.
|Person Code| You may enter a list of 'Person Code' filters.
|Department| This is an optional field. Multiple 'Department Code' filters are allowed to be entered.
|Authorization| This is an optional field. You may enter either one or multiple 'Authorization area' filters. The authorization area is retrieved from either the pay header or pay line's assignment if authorization exists at assignment level. Otherwise it is retrieved from the position of the assignment if it exists, otherwise retrieve from the department of the assignment.
|Org Level Type| This is an optional field. You may enter either one or multiple 'Org Level Type' filters. You may enter 'Org Type 02', 'Org Type 03', etc to process applicable level types or you may enter 'Org Type 02' to process only this level.
|Org Level| This is an optional field. You may enter either one or multiple 'Org Level' filters. If multiple Org Level Types are entered, then you may process across multiple levels.
|Unit| This is an optional field. Multiple 'Unit Code' filters are allowed to be entered.
|Group |This is an optional field. Multiple 'Group Code' filters are allowed to be entered.
|Payroll| This is a mandatory field. You must enter one 'Payroll Code' to be processed. The pay headers must belong to this payroll code in order to be processed.
|Cost Center| This is an optional field. Multiple 'Cost Center Code' filters are allowed to be entered. The cost centers are retrieved from the pay lines and therefore are not applicable at the Pay Header level.
|Pay Run Number| This is an optional field. You may select a list of Pay Run numbers for the Payroll code specified.


	Entity:			- mandatory, the user must enter one ‘Entity Code’ to be processed
	Payroll:			- mandatory, the user must enter one ‘Payroll Code’ to be processed
				- Pay Headers must belong to this Payroll Code in order to be processed
	Department:		- optional, multiple ‘Department Code’ are allowed to be entered
	Org Level Type:		- optional, one or multiple ‘Org Level Type’ are allowed to be entered
	- user may enter ‘Org Type 02’, ‘Org Type 03’ etc to process applicable level types or
	user may enter ‘Org Type 02’ to process only this Level
Org Level:	- optional, one or multiple ‘Org Level’ are allowed to be entered within the specified Org Level Types
				- if multiple Org Level Types are entered, then user may process across multiple levels
	Authorization:		- optional, one or multiple ‘Authorization area’ are allowed to be entered
	- the authorization area is retrieved from Pay Header or Pay line’s assignment if authorization exists at assignment level, otherwise retrieve from position of the assignment if it exists, otherwise retrieve from department of the assignment
	Unit:			- optional, multiple ‘Unit Code’ are allowed to be entered
	Group:			- optional, multiple ‘Group Code’ are allowed to be entered
	Cost Center:		- optional, multiple ‘Cost Center Code’ are allowed to be entered
	- the cost centers are retrieved from Pay Lines and therefore cost centers are not applicable at Pay Header level
	Pay Run Number		- optional, user may select list of Pay Run numbers for the Payroll code specified
	Person Code:		- the user may enter list of ‘Person Code’
	From Pay Period:		- optional, the user may select a From Pay Period for the Payroll code specified
	To Pay Period:		- optional, the user may select a To Pay Period for the Payroll code specified
				- e.g. 	From Pay Period: 	200402
					To Pay Period: 		200404
From Pay Issue Date:	- optional, the user may select a From Pay Issue Date for the Pay Headers
To Pay Issue Date:	- optional, the user may select a To Pay Issue Date for the Pay Headers
	- if the From-To Pay Issue Dates are entered, each Pay Header’s Pay Issue Date must be within this date range in order to be processed
As Of	- this date is used to retrieve Pay Runs that are with Pay Period end date or Pay Issue date that are on or prior to this As of date
	Interface Format Code	- select Interface Format Code that is with Interface Type = ’32-Pay History Interface’

	Interface Level		- mandatory, specify the level for the Interface file to be produced
				- lexicon X_INTERFACE_UPPHF values are:
					01 – Pay Headers
					02 – Pay Headers + Pay Lines
					10 – Journal Entries

	Directory Name		- enter valid directory name for interface file
	File name		- enter file name for interface file
- if the word ‘mex’ is specified in the file name, then it will be replaced with the current execution id of UPPHF run
				- for fixed format file, you may specify a file with extension .txt
				- for comma delimited format file, you may specify a file with extension .csv
				- for xml file, you may specify a file with extension .xml
	Write/Append to File	- this specifies if the Interface File is to be overwritten or appended
				- lexicon: X_WRITE_APPEND
					A – Append to File
					W – Write to File
	Exception Level		- if Exception Level = ‘0’, only exception messages will be printed
	- if Exception Level = ‘1’, one line will be printed per Pay Header with performance time
	- if Exception Level = ‘2’, one line will be printed per Pay Header with performance time and one line per Detail Level 1 record
	- if Exception Level = ‘8’ or ‘9’, full utility trace, available only if user selects by Person code, otherwise UPPHF will internally reset to Exception level ‘1’ due to volume of trace messages
	User Comment		- enter the user comment to be displayed on first page of the report
	Trial Run		- optional toggle to indicate if the UDFs are to be updated for the UPPHF run
				- the value of ‘Y’ or ‘N’ is always returned in this parameter field
	- to run in non-Trial mode (Update mode), the user should define IDIF Record Type ’92-Update Record’ to update UDFs


----
![Notes|Edit:Internal.UPPHF] 	
[{InsertPage page='Internal.UPPHF' default='Click to create a new notes page'}]