[{TableOfContents }]
!!!OREGON STATE TAX CALCULATION
[{InsertPage page='Symmetry General State Tax Calculation Set Up' section=1}]
!!Oklahoma State Tax Calculation
On [IPUTR], there is a list of applicable taxes to be calculated for State of Oklahoma:
|40-000-0000-SIT-000|Oklahoma State Tax
|40-000-0000-ER_SUTA-000|Oklahoma State Unemployment Tax
\\  \\
----
!OK – IPRLU Set Up
The Miscellaneous Tax parameters must be set up for the following Miscellaneous Identifiers.  
||Miscellaneous Identifiers||Description
|FILINGSTATUS|Mandatory\\'S'-single, 'M'-married, or 'MH'-married but w/h at higher single rate.
|TOTALALLOWANCES|Optional\\Enter the total number of allowances.
\\   \\
----
!OK – ER SUTA
ER SUTA may be bypassed on [IPUTR] with ‘Do not Calculate’ or [IPRLU] ‘SUI ER Method’ = ‘Do not Calculate’.

There are two options to set up the ER SUTA rate by state:
#IPUTR	
#*Enter the SUTA ER rate that is given by the government on the Override Tax Rate field.
#*This rate is applicable for the entire company within the State of Oklahoma.
#IDGV
#*If there is a specific rate given by the government for a different State Registration #, then enter the rate on [IDGV] by ‘Reg Type’; this overrides the [IPUTR] rate.	
\\   \\
----
!OK – Trial Calc Example
Work GEO: OK 40-149-2144230 - New Cordell, Oklahoma 
[Symmetry Set Up - OK_01.jpg]

|PC 8046  Res SIT Earn|= 1729.97
|PC 8056  Res SSP Earn|= 899.58
|                     |
|PC 6042  Res SIT|= 74.00
|PC 6052  Res SIT Sup|= 49.00
|                     |
|PC 6703 SUI ER Contr|= 2766.66 x IPUTR 40-000-0000-ER_SUTA-000 Overridden Rate 0.092
|                     |= 254.53
----
![Notes|Edit:Internal.Symmetry Set Up - OR]
[{InsertPage page='Internal.Symmetry Set Up - OR' default='Click to create a new notes page'}]

!!Oregon State Tax Calculation
On [IPUTR], there is a list of applicable taxes to be calculated for State of Oregon:
|41-000-0000-SIT-000|Oregon State Tax
|41-000-0000-ER_SUTA-000|Oregon State Unemployment Tax
|41-000-0000-WC-000|Oregon Worker's Compensation
|41-000-0000-ER_WC-000|Oregon Worker's Compensation - Employer
\\ 
If [UPUTR] is run with list of Jurisdictions, the following entries may exist:
|41-000-0000-ER_TRANS-001|Canby Transit Tax
|41-000-0000-ER_TRANS-002|Lane Transit Tax
|41-000-0000-ER_TRANS-003|Trimet Excise Tax
|41-000-0000-ER_TRANS-004|Sandy Transit Tax
|41-000-0000-ER_TRANS-005|Wilsonville Transit Tax
|41-000-0000-ER_TRANS-006|South Clackamas Transit Tax
\\
On [IPUTP], there is a list of applicable US Miscellaneous Tax Parameters for State of Oregon.  If these Miscellaneous identifiers do not exist, run [UPUTR] for State of Oregon to generate them.
||Miscellaneous Identifiers||Description
|STATE_ROUNDING|State Rounding Rule\\  \\The default value is always set to DEFAULT when this identifier is first created by [UPUTR].\\  \\For State of Oregon, the Default Rounding Rule used by Symmetry is to ROUND the State Tax result.\\  \\If rounding the state tax is not desired, enter NO in this field.

*In order to calculate the Transit tax for all employees, enter 'YES' to the applicable Transit Tax on [IPUTP].
*In order to calculate Transit Tax for certain employees, enter YES to the Transit Tax on PRLU.
\\  \\
----


 

40.1	OR – IPRLU Set Up


1)The Miscellaneous Tax Parameters must be set up for the following Miscellaneous Identifiers, if these Identifiers do not exist, UPCALC will generate the default entries for the Identifiers


	Miscellaneous Identifiers			Description

	FILINGSTATUS				- Mandatory
- 'S'-single, 'M'-married, or 'MH'-married but w/h at higher single rate.
	TOTALALLOWANCES			- Optional, enter the total number of allowances


	The user may manually enter the following optional Miscellaneous Identifiers on IPRLU:

	SUP_PAID_WITH_REG			- Optional, Supplemental Paid with Regular Wages
	SUP_PAID_WITHOUT_REG		- Optional, Supplemental Paid without Regular Wages

	TRANSIT_CANBY_TAX			- Oregon Canby Transit Tax
	TRANSIT_LANE_TAX			- Oregon Lane Transit Tax
	TRANSIT_TRIMET_EXCISE_TAX	- Oregon Trimet Excise Tax
	TRANSIT_SANDY_TAX			- Oregon Sandy Transit Tax
	TRANSIT_WILSONVILLE_TAX		- Oregon Wilsonville Transit Tax
	TRANSIT_SOUTH_CLACKAMAS_TAX	- Oregon South Clackamas Transit Tax


2) If the Workers Compensation Fund is to be calculated for an employee, the ‘WC Method’ in IPRLU (State tab) must be set to ‘Calc by US Taxation’ or ‘Both by IPWC and US Taxation’. 

- WC Method ‘Calc by IPWC Class’ will use the rates defined by class in IPWC to calculate the Workers Compensation

	- if IPRLU WC Method is not set up, then IPPGU Pay Category WC Method will be used

 

40.2	OR – ER SUTA Rate

User may bypass ER SUTA on IPUTR with ‘Do not Calculate’ or IPRLU ‘SUI ER Method’ = ‘Do not Calculate’.
There are 2 options to set up ER SUTA Rate by State:

(1)	IPUTR	- enter the SUTA ER Rate that is given by the Government on the Override Tax Rate field
		- this rate is applicable for the entire company for State of Oregon

 

(2)	IDGV		- if there is a specific rate given by the government for different State Registration #, 
				- then enter on IDGV by ‘Reg Type’, this overrides the IPUTR Rate


40.3	OR – IPPC / PC Usages

	IPPC – Set up Pay Components by PC Usages

	If user wants to calculate the following taxes, please set up IPPC for these PC Usages:
							
				
Usage	Description
6058	Pre-FWT Hours - Total Hours worked, this is used for WC calculation
7006	Workers Comp Employee Tax
7007	Workers Comp Employer Tax
7480	OR-Canby Transit Tax
7481	OR- Lane Transit Tax
7482	OR-Trimet Excise Tax
7483	OR-Sandy Transit Tax
7484	OR-Wilsonville Transit Tax
7485	OR-S Clackamas Transit Tax

 

40.4	OR – County Tax

On May 20, 2003, Multnomah County residents (GNIS Code 41-051-1135861) passed Measure 26-48, which established a temporary three year personal income tax on County residents. The tax was effective January 1, 2003. The tax is 1.25% of Oregon taxable income after deducting an exemption ($5,000 for joint filers and $2,500 for a single filer).  The Multnomah County Tax was discontinued beginning January 1, 2006. thus STE will return zero for this County Tax.

40.5	OR– Workers Comp Employee and Employer

The Oregon Employee Workers Compensation Fund is computed as a dollar amount multiplied by the number of hours worked by the employee with no limit on the amount withheld.  For 2011, the dollar amount is $0.014.  IPPC Pay Component must be set up for PC Usage 6058 Pre-FWT Hours for Workers Comp.

The Oregon Employer Workers Compensation tax is computed on the hours worked by employees

If the Workers Compensation Fund is to be calculated for an employee, the ‘WC Method’ in IPRLU (State tab) must be set to ‘Calc by US Taxation’ or ‘Both by IPWC and US Taxation’. 

If the method is ‘Calc by US Taxation’, only the WC Fund will be calculated for the employee using the rate in IPUTR.  

If the method is ‘Both by IPWC and US Taxation’, WC will be calculated using the rates defined in IPWC for Workers Compensation Class, as well as the WC fund rate defined in IPUTR.   The WC amounts will be stored in separate pay components. 

User may check the ‘Do Not Calculate’ Toggle on IPUTR to bypass WC Calculation if desired.

	If IPRLU WC Method is not set up, then IPPGU Pay Category WC Method will be used.


Note:  For Oregon Workers Compensation, if users wants to override the employee WC portion and move to the employer WC portion, then this employee WC portion becomes taxable and subject to SIT and SUTA tax.
In this case, user should calculate WC via Usercalc instead of by Symmetry.  In Usercalc, calculate the employee and employer WC portion and stores in pay component before US Taxation Pay point.  Then include this employee WC pay component into the Elements of Pre-State Earnings (Usage 6651) and Pre-SUI Employer Earnings (Usage 6752).  This approach truly reflects the Employee WC portion in the Pre-Tax Earnings pay components and will carry through the system for the use of Self-Adjust method etc.



 

40.6	OR – Transit Tax

Oregon has levied a transit tax upon employers doing business within certain transit areas. There are six areas which have Transit tax. The tax is upon regular and supplemental wages.

On IPUTR, there are 6 entries for Transit Tax

 

	If Employer requires to calculate Transit Tax for all employees, enter YES to the Transit Tax on IPUTP.
	If Employer requires to calculate Transit Tax for certain employee, enter YES to the Transit Tax on IPRLU for each employee.

 

40.7	OR – UPCALC – Symmetry Result

 


IPRLU 
	FILINGSTATUS	 		= S
	TOTALALLOWANCES	 	= 0
	TRANSIT_SANDY_TAX		= YES

	PC 8046  Res SIT Earn		= 2291.31
	PC 8056  Res SSP Earn		= 89.36
	PC 6042  Res SIT		= 170.44  (IPUTP STATE_ROUNDING = NO)
	PC 6052  Res Supp Tax		= 89.36 x 0.09 = 8.04
	PC 6703 SUI ER Contr		= 2510.71 x IPUTR 41-000-0000-ER_SUTA-000 Override Tax Rate 0.054
					= 135.58

	PC 8110  RCNTY Earn		= 2291.31
	PC 8111  RCNTY SupEarn	= 89.36
	PC 6831  Res CNTY Tax		= 0  (County Tax discontinued)
	PC 6850  Res CNTY Sup Tax	= 0  (County Tax discontinued)

	PC 5331  Workers Comp EE	= (PC Usage 6058 Pre-FWT Hours) 80 hours x 0.014 = 1.12
	PC 5332  Workers Comp ER	= (PC Usage 6058 Pre-FWT Hours) 80 hours x 0.014 = 1.12

	PC 5383  OR-Sandy Transit Tax	= Reg 2291.31 x IPUTR 41-000-0000-ER_TRANS-004 Tax Rate 0.006 
= 13.75
					= Sup 89.36 x IPUTR 41-000-0000-ER_TRANS-004 Tax Rate 0.006 = 0.54
					= 13.75 + 0.54 = 14.29


 

40.8	OR – UPCALC – Vertex Result

 


For Vertex Calculation, user must set up IPRLU State Tab Vtx. Alt Tax Method = ‘01’ in order to re-calculate State Tax using the Federal Tax based on State parameters.  Also the State Tab Vtx # of Exemption 1 should = 1 in order to for Vertex to apply the ‘Standard Deduction in the tax formula’ to match the Symmetry Oregon State tax result as above.

	PC 8045  Work SIT Earn		= 2291.31
	PC 8055  Work SSP Earn		= 89.36

	PC 6040  Work SIT		= 170.44  (Rounding = NO)
	PC 6042  Work SIT Sup		= 89.36 x 0.09 = 8.04

	PC 6703 SUI ER Contr		= 2510.71 x SUI ER Tax Rate 0.054
					= 135.58

	PC 8100  WCNTY Earn		= 2291.31
	PC 8101  WCNTY SupEarn	= 89.36
	PC 6811  WCNTY Sup Tax	= 0  (County Tax discontinued)

 

40.9	OR – Manual Calculation

Oregon Manual Tax Calculation from:

http://www.oregon.gov/DOR/BUS/payroll_updates.shtml
http://www.oregon.gov/DOR/forms/business/withholding_formulas_150-206-436_2011.pdf

 



Using the formula from Annual wages of $50,000 or higher

Annual Wages	2291.31 x 26 			= 59574.06
Federal Tax:	403.06 x 26 			= 10479.56
Since Wages <= $125.000, use PHASE OUT	= 5950.00
BASE Wages	59574.06 – 5950.00		= 53624.06


Symmetry Calculation:

BASE Wages					= 53624.06
Standard deduction $1980 for Single		= 1980		(note: Vertex user must set up Vtx Exemption 1 = 1,
								Otherwise the Standard deduction will not be applied)
	53624.06 – 1980				= 51644.06

Annual Tax Calculation:
	WH 	= 481 + [(BASE – 7750) x 0.09] – (179 x allowance)
	WH 	= 481 + [(51644.06– 7750) x 0.09] – (179 x 0)
	WH 	= 481 + 3950.47 – 0
	WH 	= 4431.47

State Tax for the period
	WH 	= 4431.47 / 26 = 170.44