[{TableOfContents }]

!!!INDIANA STATE TAX CALCULATION
!!State Tax Calculation - General Set Up

Please refer to document [PR_US_Federal_Tax_Calc.doc] '€˜General Set Up'€™ section for all set up requirement.

At state level, the following screens should be verified set up for each state:

!IPUTR
This screen is used to: 
*view US Tax Rates by state and to enter the Overridden rates and Wage Base.
*suppress some SUTA Surcharge Calculation for some states by checking the '€˜Do not Calculate'€™ toggle

!IPUTP		
This screen is used to: 
*view US Tax Miscellaneous Parameters by the states that are applicable for [IPRLU]

!IDGV
*This screen may optionally contain specific Override rates and Wage bases by Government Registration for each Registration from the Pay Header'€™s group
*[IDGV] overridden amounts take precedence over the [IPUTR] overridden amounts

!IPRLU/IPRULS 
*Each employee must be set up with the applicable Tax Methods
*Miscellaneous Tax Parameters must be set up by the states that need to be paid

!UPRLU	
This process audits the US Tax Filing information and generates [IPRLU] Miscellaneous Tax Parameters information according to [IMCT] set up

!IPPH		
*The Pay Header tab must specify the default Work Jurisdiction and Home Jurisdiction
*In the Pay Lines tab, the Jurisdiction field must specify the Work Jurisdiction of this pay line
*After Trial Calc or UPCALC, the Pay Amounts tab will contain all US Taxation amounts in summary that are used for the calculation of net pay
*The Pay Jurisdiction tab contains the default Work Jurisdiction and Home Jurisdiction
*After Trial Calc or UPCALC, the Pay Jurisdiction tab contains all US Taxation amounts by jurisdiction in detail

!!Idaho State Tax Calculation
On [IPUTR], there is a list of applicable taxes to be calculated for State of Hawaii:
|16-000-0000-SIT-000|Idaho State Tax
|16-000-0000-ER_SUTA-000|Idaho State Unemployment Tax
|16-000-0000-ER_SUTA_SC-013|Idaho Administrative Reserve
|16-000-0000-ER_SUTA_SC-049|Idaho Workforce Development
\\
----
!ID – IPRLU Set Up
The Miscellaneous Tax Parameters must be set up for the following Miscellaneous Identifiers
*If these identifiers do not exist, [UPCALC] will generate the default entries for the identifiers.
||Miscellaneous Identifiers||Description
|FILINGSTATUS|Mandatory\\The valid filing statuses are:'S'-single, 'M'-married, or 'MH'-married but w/h at higher single rate.
|TOTALALLOWANCES|Optional\\Enter the total number of allowances	
\\   \\
----
!ID – ER SUTA Rate
ER SUTA may be bypassed on [IPUTR] with ‘Do not Calculate’ or [IPRLU] ‘SUI ER Method’ = ‘Do not Calculate’.

There are two options to set up the ER SUTA rate by state:
#IPUTR	
#*Enter the SUTA ER rate that is given by the government on the Override Tax Rate field.
#*This rate is applicable for the entire company within the State of Idaho.
#IDGV
#*If there is a specific rate given by the government for a different State Registration #, then enter the rate on [IDGV] by ‘Reg Type’; this overrides the [IPUTR] rate.	
 
\\
----
!ID – Special Taxes
[IPUTR] - Employer SUTA Surcharge Tax
#Hawaii Employment And Training Tax - By default, the following tax will be calculated unless the [IPUTR] ‘Do Not Calculate’ toggle is checked or [IPRLU] ‘SUI ER Method’ = ‘Do not Calculate’.
#Hawaii SDI/TDI - By default, the following tax will be calculated unless the [IPUTR] ‘Do Not Calculate’ toggle is checked or IPRLU ‘SDI EE Method’ = ‘Do not Calculate’. 
 
[IPPC] – Set up Pay Components for these PC Usages
||Usage||Description
|7230|ID-Admin Reserve Tax
|7231|ID-Workforce Development Fund

[IPUTR] – ID Special Taxes
#Idaho Administrative Reserve - The rate is assigned by the state to the employer, the rate needs to be entered on the Override Tax Rate.
#Idaho Workforce Development - The rate is assigned by the state to the employer, the rate needs to be entered on the Override Tax Rate.
\\   \\
----
!ID – IPUTP STATE_ROUNDING
*In order to make sure the state tax is not rounded, enter 'NO' to STATE_ROUNDING as the default setting for Idaho is to round.
*The State Tax results show that the state tax is always rounded regardless of this setting, therefore the State of Idaho requires the state tax to be rounded.
\\   \\
----
!ID – UPCALC Example
[Symmetry Set Up - ID_01.jpg]\\   \\[IPRLU Miscellaneous|IPRLU#MiscellaneousTab] Tab 
;FILINGSTATUS:= S
;TOTALALLOWANCES:= 0

|PC 8046  Res SIT Earn|= 3004.25
|PC 6045  Res SIT|= 216.00, regardless of IPUTP STATE_ROUNDING = DEFAULT or NO
|           |
|PC 8056  Res SSP Earn|= 918.95
|PC 6052  Res Supp Tax|= 72.00, regardless of IPUTP STATE_ROUNDING = DEFAULT or NO
|           |
|PC 6703 SUI ER Contr|= 4097.06 x IPUTR 16-000-0000-ER_SUTA-000 Override Tax Rate 0.068000
|                     |= 278.60
|           |
|PC 6430 ID-Admin Reserve Tax|= 4097.06 x IPUTR 16-000-0000-ER_SUTA_SC-013 Override Tax Rate .011
|			     |= 45.07
|           |
|PC 6431 ID-Workforce Fund|= 4097.06 x IPUTR 16-000-0000-ER_SUTA_SC-049 Override Tax Rate .022
|			  |= 90.14
----
![Notes|Edit:Internal.Symmetry Set Up - IN]
[{InsertPage page='Internal.Symmetry Set Up - IN' default='Click to create a new notes page'}]

!!Indiana State Tax Calculation
|18-000-0000-SIT-000|Indiana State Tax
|18-000-0000-ER_SUTA-000|Indiana State Unemployment Tax

If [UPUTR] is run with list of Jurisdictions, then the following entries may exist:
|18-057-0000-CNTY-000|Hamilton County Tax|Showing County Tax Rate
|18-141-0000-CNTY-000|Saint Joseph County Tax|Showing County Tax Rate
|18-011-0000-CNTY-000|Boone County Tax|Showing County Tax Rate
|18-097-0000-CNTY-000|Marion County Tax|Showing County Tax Rate, etc

17.1	IN – IPRLU Set Up

- The Miscellaneous Tax Parameters must be set up for the following Miscellaneous Identifiers
	- if these Identifiers do not exist, UPCALC will generate the default entries for the Identifiers

	Miscellaneous Identifiers			Description
	DEPENDENTEXEMPTIONS		- Optional, enter the total number of dependent exemptions
	PERSONALEXEMPTIONS		- Optional, enter the total number of personal exemptions

17.2	IN – ER SUTA Rate

User may bypass ER SUTA on IPUTR with ‘Do not Calculate’ or IPRLU ‘SUI ER Method’ = ‘Do not Calculate’.
There are 2 options to set up ER SUTA Rate by State:
(1)	IPUTR	- enter the SUTA ER Rate that is given by the Government on the Override Tax Rate field
		- this rate is applicable for the entire company for State of Indiana

 

(2)	IDGV		- if there is a specific rate given by the government for different State Registration #, 
				- then enter on IDGV by ‘Reg Type’, this overrides the IPUTR Rate
 

17.3	IN – Trial Calc Example

 

Work GEO: 18-097-452890  Indianapolis, Marion County
IPRLU 
	DEPENDENTEXEMPTIONS	= 0
	PERSONALEXEMPTIONS	= 0

	PC 8046  Res SIT Earn		= 2183.31
	PC 6042  Res SIT		= 2183.31 x 3.4% = 74.23
	PC 8056  Res SSP Earn		= 908.25
	PC 6052  Res Supp Tax		= 908.25 x 3.4% = 30.88

	PC 6703 SUI ER Contr		= 3241.80 x IPUTR 18-000-0000-ER_SUTA-000 Override Tax Rate 0.095
					= 307.97
	PC 8110  RCNTY Earn		= 2183.31
	PC 6831  Res CNTY Tax		= 2183.31 x 0.0162 = 35.37
	PC 8111  RCNTY SupEarn	= 908.25
	PC 6850  Res CNTY Sup Tax	= 908.25 x 0.0162 = 14.71