[{TableOfContents }]

!!!MINNESOTA PERA REPORT
----

!!SET UP REQUIREMENTS
!!1. Setup new User Fields - IMUF
One new user field is needed to set up in the BEND table(P2K_ENROLLMENT_DETAILS) to translate and populate the PERA demographic record type (Type 42) for new employees where applicable.

The PERA_EXLCUDE_CODE user field should be set up to populate the exclusion code field (Positions 101-103)

!!2. Setup new User Defined Lexicons - IMLN
Three new User Defined Lexicons must be set up to specify the:

* PERA employment status
* PERA position class
* PERA position code


!!PERA Employment Status
Lexicon Name: PERA_EMPLOY_STATUS
Cross reference the EASD Change Reason with the PERA Employment status. Enter the PERA reportable Change Reason codes only in the SAVED VALUE column and enter the corresponding PERA status in the DISPLAYED VALUE column.  A PERA_SWITCH/SW row must exist in order to report those employees who switch PERA plans.

Any Change Codes that are not entered in this table are assumed to be not reportable to PERA.

!! PERA Position Class
Lexicon Name: PERA_POSITION_CLASS
This lexicon is used to cross reference the Group Code with the PERA Position Class Code.  Enter the Group Code under the SAVED VALUE column and enter the corresponding Position Class Code under the DISPLAYED VALUE column.

!! PERA Position Code
Lexicon Name:  PERA_POSITION_CODE
This lexicon is used to cross reference the reportable JOB CODES with the PERA Position Code.  Only the Job Codes that have equivalent PERA positions are required to be entered in this table.  Any Job Codes not listed in this table will automatically be translated to the OTHER PERA Position Code.  Enter the Job Code under the SAVED VALUE column and enter the PERA Position Code under the DISPLAYED VALUE column.

!! 3. Setup new Plan Type - IBPT
Plan Type Name: MNPERA (No exceptions)
Define the MN Public Employee Retirement Administration System benefit plan type.

!! 4. Setup new Plan - IBPN
Plan Name:  MNPERA
Define the MN_PERA Plans.  Users can define the Plan Code and the Plan Name, but the various PERA assigned Plan IDs must be entered as a COVERAGE within this Plan.  The PERA Plan ID must be entered as the first 2 characters in the Policy Number of the COVERAGE table.

!!5. Setup PERA Benefit Components - IBPN
Components section for the MN PERA Benefit Plans. Regular Date Components also applied where necessary.

|Pay Component| Name|Source|Description|
|B2010|Regular Pensionable Earnings (Pay Type 01)|Pay Element/Pay PC|Total employee earnings for the reporting period that are deemed pensionable.  It must be stored in a Pay PC that the report program can access.|
|B2012|Regular Employer Contribution Amount|Pay Element or system calculated|Regular ER Contribution.  The system will calculate this amount using the ER rate.|
|B2014|Regular Employee Deduction Amount|Pay Element or system calculated| Regular Deduction Amount for the Pay Period based on the regular pay period salary.  The system will calculate this amount using the EE rate.|
|B2016|Additional ER Contribution on Regular Earnings|Pay Element|Additional ER Contribution Amount.|
|B2020|Earning Adjustment (Pay Type 02, A)|Pay Element|Pensionable Salary Adjustment|
|B2022|ER Deduction Adjustment|Pay Element or system generated|ER Contribution Amount that is based on the Salary Adjustment|
|B2024|EE Contribution Adjustment|Pay Element or system generated|Deduction Amount based on the Earning Adjustment|
|B2026|Additional ER Contribution on Adjustment Pays|Pay Element|Additional ER Contribution Amount|
|B2040|Grievance Earning (Pay Type 04)|Pay Element/Pay PC|Total grievance earnings for the reporting period that are deemed reportable|
|B2042| Grievance Employer Contribution Amount|Pay Element or system calculated|Grievance ER contribution amount.  The system will calculate this amount using the ER rate|
|B2044|Greivance Employee Deduction|Pay Element or system calculated|EE Deduction Amount for the Pay Period based on the grievance pay.  The system will calculate this amount using the EE rate.|
|B2046|Additional ER amount on grievance pays|Pay Element or system generated|Additional ER amount on Grievance Pay|
|B2050|Retroactive Earning (Pay Type 05)|Pay Element|Pensionalble Retroactive Salary|
|B2052|Retroactive ER Contribution|Pay Element or system generated|ER Contribution amount that is based on the Retroactive Salary|
|B2054| Retroactive EE Deduction|Pay Element or system generated|EE Deduction amount based on the Retroactive Earnings|
|B2060|Omitted Earnings (Pay Type 06)|Pay Element|Omitted Pays|
|B2062|Imitted ER Contribution|Pay Element or system generated|ER Contribution Amount that is based on the Omitted pays|
|B2064|Imitted EE Deduction (Pay TYpe 06)|Pay Element|Omitted EE Deduction Amount|
|B2066|Additional ER Amount on Omitted Pays|Pay Element or system generated|Additional ER amount on Omitted pay|
|B2070|Lump Sum Comp Pay Out|Pay Element|Total Lump Sum Payout|
|B2072|ER Contribution on Lump Sum Payout|Pay Element or system generated|ER Contribution on Lump Sum Payout|
|B2074| EE Deduction on Lump Sum Payout|Pay Element or system generated|EE Deduction on Lump Sum Payout|
|B2076|Additional ER Amount on Lump Sum Payouts|Pay Element or system generated|Additional ER amount on Lump Sum Payout|
|B0290|Member Hours|PC|Use for Definition only.  It must have an Hours PC associated to it, for reporting pruposes.


!!6. Setup PERA Contribution Rates - IBPN
The RATES section of the MN PERA Plan (only the EE, ER and User 1 rates are used, and are expressed as a percentage.  The User 1 Rate is used to define the Additional ER contribution RATE.

!!PROCESSING
* Once the set up of the MN PERA Benefit Plan Types and Plans is complete, the Pay Elements for each Benefit Component must be established.  The Plan setup will be used as the definition for processing.
* All Employee/Employer Amounts calculated through this Plan will be reported on the File and the Report.
* Normally, only PERA Record Types of 30, 31 AND 38 will be created.
* When a new employee starts the PERA deduction, or there is a change of employment status, or address change, then Record Type 42 will be created under a separate demographic file.
* A change of employment status, including new employment, is defined as the record having a Change Reason Code that is defined in the User Lexicon PERA_EMPLOY_STATUS.
* A switch in PERA plans must occur at the end of a Pay period.  Example: The old Plan will be terminated at the end of a pay period and the new Plan will be effective at the beginning of the immediately following pay period.  In this case, a New record for the new Plan and a Termination record for the old Plan will be created. A switch of the plans must be identified with PERA_SWITCH as the Change Reason code.

!! REPORTING PROCESS
* The Pay Calendar and Pau Issue Date must be entered.
* The six-character PERA employer ID must be entered.  This number can be defaulted through the IMPM form.
* The Detail File Name is 200 bytes long and contains the required 30, 31 and 38 Record Types.
* The Enroll File Name is 400 bytes long and contains the optional 42 Enrollment Record Type.


!!MAGNETIC MEDIA REPORTING





!!Report Parameters & Filters

||Report Parameters||
|Plan Type|Mandatory, LOV available
|Plan Code|Optional, LOV available
|Department Code|Optional, LOV available
|Pay Category|Optional, LOV available
|Include Reversal|Optional, LOV available, <YES/NO>
|Reversal Pay Category|Optional, LOV available
|Pay Calendar|Mandatory, LOV available\\Limits the process to the pay calendar specified. 
|Pay Issue Date|Mandatory, Date, LOV available\\This field displays the pay issue date. 
|PERA Employer ID|Mandatory,text\\
|Create File|Optional, LOV available, <YES/NO>\\The report may be run without creating an interface file (normally for testing purposes). 
|Directory Name|Mandatory, text\\Must be a directory on the server for which the current user (as signed onto the client’s network) has write capability. For example, the entry ‘C:\TEMP’ accesses the ‘TEMP’ directory on the server, not the local directory for the computer terminal being used. 
|Detail File Name|Mandatory, text\\Enter the name of the file that will be created in the interface directory specified.
|Enroll File Name|Mandatory, text\\Enter the name of the file that will be created in the interface directory specified.
|Include Exception|Optional, LOV available, <YES/NO>
|Exception Level|Mandatory, LOV available\\A ‘trace’ report of exception messages may be produced to assist in the testing phase. If necessary, choose from 0 – 9 (highest) level of trace. Please note that this is a voluminous report and will cause very slow performance. 
 
----

![Notes|Edit:Internal.RBMNPERA] 	
[{InsertPage page='Internal.RBMNPERA' default='Click to create a new notes page'}]