[{TableOfContents  }]
!!!DEDUCTIONS AND ARREARS
[Pay Components|PAY COMPONENTS] are any identifiable components of a pay, or any item that needs to be stored or totaled.

Deduction Pay Components may be positive or negative and may generate arrears when there are insufficient earnings for a positive deduction or when a negative deduction is to be collected.

!!Pay Component Deduction Rules
A deduction [pay component|PAY COMPONENTS] will be calculated as a “Positive Amount” or “Negative Amount” during the [UPCALC] process.
 
Under normal circumstances, a deduction will be a positive amount. This amount will reduce the gross pay amount to arrive at the net pay.

When there are insufficient earnings in a pay to cover all positive deductions, then [UPCALC] will go through the insufficient earnings processing logic for each deduction [pay component|PAY COMPONENTS] with the arrears rules set up in the Pay Component ([IPPC]) form for that specific deduction [pay component|PAY COMPONENTS].

If the deduction [pay component|PAY COMPONENTS] is a negative amount, then [UPCALC] will go through special processing for the “Negative Deductions”.
\\
----
!!Positive Deductions
!Insufficient Earnings Rules
When there are not enough earnings to cover a deduction, you will decide for each deduction [pay component|PAY COMPONENTS] which [Insufficient Earnings|POSITIVE_DEDUCTION] rule will be used by selecting a value from the [X_DEDN_POSITIVE_RULE] lexicon.

The choices from which you may select are as follows:

(Note: You may or may not want to collect the deduction back. If you would like to collect the deduction back, the Create Arrears toggle for the deduction portion not taken must be ON.)

;All or none
;:When there are insufficient earnings to cover the deduction, [UPCALC] will not take any of the deduction. This choice is typically used for items such as savings, bonds, charitable donations, credit union, etc.

;:Some of these deductions may require arrears to be generated, some will not. If the ‘[Create Arrears|POSITIVE_ARREARS]' option is chosen, the system generates arrears under the original [pay component|PAY COMPONENTS] for the entire amount of the deduction. The arrears are stored on the Maintain Sundry ([IPSN]) form to be recovered from the employee on the next pay to be processed.

;As much as possible
;:When there are insufficient earnings to cover the deduction, [UPCALC] will deduct as much as possible from the gross pay amount.

;:This is typically used for items such as loan repayments, parking, union dues, etc. This option is also often used for items like benefits or insurance, where it is preferable to obtain at least a partial contribution from the employee.

;:If the ‘[Create Arrears|POSITIVE_ARREARS]' option is chosen, the system generates arrears under the original [pay component|PAY COMPONENTS] for the amount NOT taken. The arrears are stored on the Maintain Sundry ([IPSN]) form to be recovered from the employee on the next processed pay.

;Full with advance
;:When there are insufficient earnings, [UPCALC] will take as much as possible of the deduction from the available gross and then advance money to cover the remaining deduction amount. In this way, the deduction will be taken in full.

;:When [UPCALC] advances money, the deduction [pay component|PAY COMPONENTS] is recorded with the full deduction amount. If the company wants to collect the advance money back, you should turn the ‘[Create Arrears|POSITIVE_ARREARS]’ toggle on. When this option is chosen, the system generates arrears under the 'Recoverable Advance' [pay component|PAY COMPONENTS] for the amount advanced to the employee. The arrears are stored on the Maintain Sundry ([IPSN]) form to be recovered from the employee on the next processed pay.

!Create Arrears
If the [Create Arrears|POSITIVE_ARREARS] toggle is ON, arrears are created for any amount that could not be deducted. If arrears are to be created for the portion not taken, then depending on the Positive Deduction rule, the arrears will be created under either the original deduction [pay component|PAY COMPONENTS] or the recoverable advance [pay component|PAY COMPONENTS].

If the toggle is OFF, arrears will not be created and any uncollected amount will NOT be recorded.
\\
----
!!Negative Deductions
!Negative Deduction Rule
The pay component deduction rules on the [IPPC] form determine what the system should do when a deduction [pay component|PAY COMPONENTS] is negative. You will decide from the [Negative Deduction|NEGATIVE_DEDUCTION] field which value from the [X_DEDN_NEGATIVE_RULE] lexicon suits that deduction [pay component|PAY COMPONENTS].

Normally, a deduction [pay component|PAY COMPONENTS] is for a negative value because you are refunding an overpayment of a deduction to an employee (e.g. benefit refund). Occasionally, a company may define certain ‘advances’ as deduction [pay components|PAY COMPONENTS], in order to use the arrears feature to recover the advance at a later date (e.g. travel advance). This amount will be added to the gross pay or net pay according to the Negative Deduction rule.

A deduction may result in a negative amount in two ways:

# You enter the deduction as a negative amount on the transaction form. 
#* E.G. Your company gives a travel advance to an employee. You may set up a “Travel Advance” [pay component|PAY COMPONENTS] as a deduction [pay component|PAY COMPONENTS] and then enter a negative amount through the transaction form to give the advance. The negative deduction will be added to gross or net pay.
#*(The company may want to collect the “Travel Advance” back by setting the ‘Collect Back’ arrears toggle on for a negative deduction.)
# The deduction is internally generated by [UPCALC] and results in a negative amount. A deduction may be calculated from [usercalcs|USERCALC], benefit plans, taxes, etc. and the result is a negative amount. This negative amount may be correct or incorrect, however, [UPCALC] must know how to deal with this amount. If the [Pay Component|PAY COMPONENTS] rules are not set up to handle the negative deduction, then [UPCALC] will take the default, add the negative deduction amount to gross pay and not set up arrears. All negative deductions will be processed first, prior to the positive deductions, so those negative deduction amounts are added into gross pay or net pay before taking other deductions.


;Add To Gross (default)
;:This rule returns the amount of the deduction to the employee by adding it back to the employee's gross pay (for internal calculation purposes only) and enabling it to be used to cover other deductions.
;:This will not physically change the gross pay component total, but it will reduce the deductions total and make the ‘refund’ amount available to meet other deductions in this pay.
;:If arrears are to be created for the negative deduction, the arrears will be created under the original deduction [pay component|PAY COMPONENTS].

;Add To Net
;:This rule returns the entire amount of the deduction to the employee, but does not enable it to cover any other deductions. This option tends to be used for items that are not normally part of the gross to net calculation, such as allowances or expense reimbursements.
;:The option to ‘add to net’ will physically increase the net pay component, and ensure that the employee receives at least the negative deduction or ‘advance’ amount in this pay.
;:If arrears are to be created for the negative deduction, the arrears will be created under the original deduction [pay component|PAY COMPONENTS].

!Collect Back
If the [Collect Back|NEGATIVE_ARREARS] toggle is ON, arrears are created for the entire amount of the deduction. 

If the toggle is OFF, arrears will not be created.

The [Collect Back|NEGATIVE_ARREARS] toggle is only set to ON for the pay component usage of ‘5 - Advance Recovered’. If Collect Back is set ON for deductions this will result in an incorrect calculation during the next pay as arrears will be generated and the gross amount
reduced.
\\
----
!!Arrears Processing
If all or part of the deduction could not be taken and the PC set up indicates positive or negative arrears, then the set up must also indicate how to collect the arrears.

The [Arrears Recovery|DEDUCTION_RECOVERY] rule tells the system how to recover multiple arrears for the same deduction [pay component|PAY COMPONENTS]. The user would select a value from the [X_DEDN_RECOVERY_RULE] lexicon.

If the recovery rule does not exist, any arrears created will NOT be collected. 

When an arrears is created and stored in [IPSN], the pay point for the arrears is normally changed to ’70-After Govt Calcs’. This ensures that the amount that may have reduced/ increased taxable earnings in the current pay does not affect taxable earnings again in the pay in which it is recovered.

This pay point change is NOT done if the current pay has zero gross. As the amount could not have affected taxation, the arrears amount will be left at the pay point indicated on the pay component in order to be considered during the pay in which it is recovered.

!Arrears Recovery Rule
;Only One per Pay
;:This rule recovers the arrears on a single transaction basis. This rule is used for larger amount deductions where it is unlikely that there will be sufficient earnings to cover more than the regular deduction plus a single arrears transaction.

;:For example, when an employee is three deductions in arrears for the same pay component, the pay calculation process attempts to recover only the oldest arrears transaction for that pay component. If there are insufficient earnings to collect the whole amount of the arrears transaction, the uncollected balance is generated as a new arrears transaction.

;Recover All At Once
;:This rule recovers arrears on a multiple transaction basis. This rule is used for deductions that are small enough for there to be a strong possibility of recovering more than one deduction from the same pay check.

;:For example, when an employee is three deductions in arrears for the same pay component, the pay calculation process attempts to recover each of these three deductions on the next pay. If there are insufficient earnings to collect the whole amount of the arrears transaction, the uncollected balance is generated as a new arrears transaction.
\\
----
!!Deduction and Arrears Processing Notes
*All arrears are stored in the Maintain Sundry ([IPSN]) form.

*The original pay number of the transaction is also stored in the arrears line for auditing purpose.

*The dates on an arrear will be the beginning of time to the end of time, so that any pays that are processed regardless of the pay period, can recover the arrears.

*If the original line has a distribution code, then the arrears will be generated with the original distribution code, otherwise the distribution code will be blank.

*During the "Net Pay" process in [UPCALC], the gross pay will be reduced by all the deductions from the Total Deduction element. If the net pay is greater than zero, this pay is considered to have “sufficient earnings” to cover all its current deductions.

*When a pay has sufficient earnings to cover all its current deductions, the pay process will try to recover the arrears generated from prior pay(s) of the same [UPCALC] run or from the existing arrears that are recorded on the [IPSN] form.

*When recovering the arrears from a prior pay, each arrears deduction will be recovered according to the [Arrears Recovery|DEDUCTION_RECOVERY] rule as specified in the pay component rules by the order the arrears are created i.e. the oldest arrears will be collected first.

*Exception messages will be issued in the Calculation Exception report for each arrears deduction collected.

*When arrears are generated under the original deduction [pay component|PAY COMPONENTS], if the deduction [pay component|PAY COMPONENTS] is made up from one or more lines of transactions, the arrears will be generated according to the input transactions so that the original distribution can be used.

----
!!Deduction and Arrears Processing Examples
The $ symbol refers to a pay element.

!Example 1,  Insufficient Earnings To Cover All Deductions

In period 2005-06, employee has $GROSS and $DEDUCTION as follows:

|$GROSS| PC 100| = |$80
| |PC 101 |= |$20
|Therefore, gross pay| | =| $100
|$DEDUCTION |PC 200| =| $50
| |PC 201| =| $40
| |PC 202| = |$30

The $DEDUCTION element will be processed in following steps:
;The order of processing is based on the $DEDUCTION element not the order of the pay component number.

1. Deduction PC 200 = $50
|| ||Gross|| Adv|| Ded|| Arrears ||Ttl Dedn|| Net
|PC 200| $100| $0| $50| $0| $50| $50

2. Deduction PC 201 = $40
|| ||Gross|| Adv|| Ded|| Arrears ||Ttl Dedn|| Net
|PC 200| $100| $0| $50| $0| $50| $50
|PC 201| $50|$0|$40|$0|$90|$10

3. Deduction PC 202 = $30
;:Process Insufficient Earning logic as defined in Pay Component Rules.
;:The following chart illustrates the different amounts to be calculated depending on the "Positive Deduction Rule" and the "Create Arrears" toggle:
;: __00 All or None NO Arrears__
|| ||Gross|| Adv|| Ded|| Arrears ||Ttl Dedn|| Net
|PC 200| $100| $0| $50| $0| $50| $50
|PC 201| $50|$0|$40|$0|$90|$10
|PC 202| $10| $0| $0| $0| $90| $10
\\
;:__00 All or None with Arrears__
|| ||Gross|| Adv|| Ded|| Arrears ||Ttl Dedn|| Net
|PC 200| $100| $0| $50| $0| $50| $50
|PC 201| $50|$0|$40|$0|$90|$10
|PC 202| $10| $0| $0| $30| $90| $10

;:Msg.: "ARREARS GENERATED, PC 202, AMOUNT = 30.00"
\\
;: __01 As much as possible NO Arrears__
|| ||Gross|| Adv|| Ded|| Arrears ||Ttl Dedn|| Net
|PC 200| $100| $0| $50| $0| $50| $50
|PC 201| $50|$0|$40|$0|$90|$10
|PC 202| $10| $0| $10| $0| $100| $0

\\
;:__01 As much as possible with Arrears__
|| ||Gross|| Adv|| Ded|| Arrears ||Ttl Dedn|| Net
|PC 200| $100| $0| $50| $0| $50| $50
|PC 201| $50|$0|$40|$0|$90|$10
|PC 202| $10| $0| $10| $20| $100| $0
;:Msg.: "ARREARS GENERATED, PC 202, AMOUNT = 20.00"
\\
;:__02 Full with Advance NO Arrears__
|| ||Gross|| Adv|| Ded|| Arrears ||Ttl Dedn|| Net
|PC 200| $100| $0| $50| $0| $50| $50
|PC 201 |$50 |$0 |$40 |$0 |$90 |$10
|PC 202| $10| $20| $30| $0| $120| $0

\\
;:__02 Full with Advance with Arrears__
|| ||Gross|| Adv|| Ded|| Arrears ||Ttl Dedn|| Net
|PC 200| $100| $0| $50| $0| $50| $50
|PC 201 |$50 |$0 |$40 |$0 |$90 |$10
|PC 202| $10| $20| $30| $20| $120| $0
;:Msg.: "ARREARS GENERATED, PC 40, AMOUNT = 20.00"
\\
!Example 2: Second Pay Period Recovers Arrears From Example 1

In period 2004-06, employee has $GROSS and $DEDUCTION as follows:
|$GROSS| PC 100| =| $800
|Therefore, gross pay| |=| $800
|$DEDUCTION| PC 200| =| $50
| |PC 201| =| $40
| |PC 202| =| $30

The $DEDUCTION element will be processed in following steps:
|| ||Gross|| Adv|| Ded|| Arrears ||Ttl Dedn|| Net
|PC 200| $800| $0| $50| $0| $50| $750
|PC 201| $750 |$0 |$40 |$0 |$90 |$710
|PC 202| $710| $0| $30| $0| $120| $680

After processing element $DEDUCTION, the gross pay is $680

When there are sufficient earnings to cover all deductions for this pay, this pay will try to recover the arrears from prior pay of the same [UPCALC] run or from the sundry file.

Arrears deductions to be recovered from prior pay are:
;:PC 202 = $20 (from Pay 2005-06)

|| ||Gross|| Adv|| Ded|| Arrears ||Ttl Dedn|| Net
|PC 200| $800| $0| $50| $0| $50| $750
|PC 201| $750 |$0 |$40 |$0 |$90 |$710
|PC 202| $710| $0| $30| $0| $120| $680
|PC 202| $680| $0| $50| $0 |$140| $660
;:Msg.: "ARREARS RECOVERED, PC 202, AMOUNT = 20.00"

\\
!Example 3: Second Pay Period Goes Into Arrears Again For Example 1
In period 2004-06, employee has $GROSS and $DEDUCTION as follows:
|$GROSS| PC 100| =| $100
|Therefore, Gross Pay| | =| $100
|$DEDUCTION| PC 200| =| $50
| |PC 201| =| $40
| |PC 202| =| $30

The $DEDUCTION element will be processed one at a time until there are insufficient earnings:
|| ||Gross|| Adv|| Ded|| Arrears ||Ttl Dedn|| Net
|PC 200| $100| $0| $50 |$0| $50| $50
|PC 201| $50| $0| $40| $0| $90| $10

When there are insufficient earnings, the remaining deduction pay components from $DEDUCTION will be processed one at a time by the Insufficient Earning logic:
;:Assume PC 202 Deduction rule = 01 and Create Arrears = yes
|| ||Gross|| Adv|| Ded|| Arrears ||Ttl Dedn|| Net
|PC 200| $100| $0| $50 |$0| $50| $50
|PC 201| $50| $0| $40| $0| $90| $10
|PC 202| $10| $0| $30| $20| $100| $0
;:Msg.: " ARREARS GENERATED, PC 202, AMOUNT = 20.00"
After processing element $DEDUCTION, the net pay is $0

When there are insufficient earnings to cover all deductions for this pay, the arrears from prior pay will not be recovered.

;:__After 2004-06__
;:Net Pay = $0
;:$Total Deductions = $100
;:Msg.: "NET PAY = ZERO"
\\
;:Arrears are:
;:PC 202 = $20 (new arrears from 2003 -05)
;:PC 202 = $20 (previous arrears from 2003-04)


----
![Notes|Edit:Internal.DEDUCTIONS+AND+ARREARS] 	
[{InsertPage page='Internal.DEDUCTIONS+AND+ARREARS' default='Click to create a new notes page'}]